Search

The method is applicable to products having a minimum KCl content of about 95 % (m/m). The principle consists in dissolution of a test portion taken from the previously ground and sifted laboratory sample and elimination of many ammonium ions present. Precipitation of the potassium, in a slightly acid medium, by an excess of an standard volumetric sodium tetraphenylborate solution. Filtration and…

Three types of crucibels are specified: Type 1, low form, type 2 medium form and type 3 tall form bases an a height/diameter ratio of 0,63; 0,8 and 1,25 resp. Further two types of lid are described: type D, a lid of slightly domed shape and typ R, a recessed lid. Material and construction are specified, shape and dimensions are shown in drawings and in a table.

The requirements specify the quality of the material. The different methods of test are specified. They concern the porosity and imperfections of glaze, the resistance to heat and sudden change in temperature, the resistance of glaze to high temperature, to acid and to alkali and the constancy of mass on ignition.

A system of color coding is specified for one-mark pipettes for identification of nominal capacities, and for graduated pipettes for identification of nominal capacities and unit of subdivision. The color code bands for the different capacities are tabled and the method of marking is specified. Suitable requirements and test methods for the durability of the colours are intended to be considered…

The requirements deal with the geometric charateristics to ensure interchangeability. The dimensions of the joint-ground zone and the outer diameter of the tube connected to the joint are given in a table and illustrated in a drawing. In addition the surface finish is specified. A system of gauges (stell balls) for testing the ball cup is tabled. In the annex a method of testing the leakage…

A method is specified for comparing the mean of a population of differences with zero or any other preassigned value. It may be applied to establish a difference between two treatments, where "treatment" should be understood in a wide sense, e.g. as a test method, measuring instrument or laboratory involved, and is applicable under the conditions that the series of differences can be…

Applies to the dimensions of hospital, laboratory and industrial general purpose smocks for wear by men.

This part contains a method for taking laboratory samples intended for the determination of the water content and the preparations of the test samples. Contains instructions for handling with the material. Applicable for taking samples of this highly corrosive liquid from road and rail tanks, drums and cylinders. The principle consists in allowing the liquid of one of these containers to flow in…

Establishes under laboratory conditions: their suitability for use over stated ranges of temperature, air pressure and humidity, their ability to withstand specified conditions of mechanical shock, their ability to withstand the rigours of normal assembly processes.