1. Scope
1.1 General
This Standard specifies requirements for mortar for use in bedding, jointing
and bonding of masonry units, or other structural units, and for grout for use
in filling core or cavity space, or both, in unit masonry construction.
Note: The term "unit masonry" refers to masonry construction using clay or
shale masonry units, sand-lime masonry units, or…
1.1
This method covers laboratory-conducted performance tests for specific types of
sorbent materials, regardless of their mode of action, of the sorption of crude
oil, its contained nautral components and mixtures thereof.
1.2
This document does not apply to Type III booms or pillows, or Type Iv
agglomeration units.
Establishes a consistent and reproducible means of evaluating the load-carrying characteristics of roll-over protective structures under static loading, and prescribes performance requirements for a representative specimen under such loading. Applies to the following seated design operator-controlled machines as defined in ISO 6165: crawler tractors and loaders, graders, wheeled loaders and…
Self-propelled machinery for forestry — Roll-over protective structures — Laboratory tests and perfo...
Establishes a consistent, reproducible means of evaluating force-deflection characteristics of roll-over protective structures under static loading, and prescribes performance requirements for a representative specimen under such loading. Applies to mobile and self-propelled specially designed machinery for forestry as defined in ISO 6814.
This National Standard of Canada is equivalent to American national Standard
ANSI/BHMA A156.21-1989.
1.1 This Standard establishes requirements for thresholds. Types are
described with identifying numbers. Strength tests and fastening systems are
included.
1.2 Test described or referenced in this Standard are performed under
laboratory conditions. In actual use, results may vary…
This National Standard of Canada is equivalent to American National Standard
ANSI/BHMA A156.11-1991.
1.1 This standard establishes requirements for Cabinet Locks used on doors,
drawers and furniture. Cycle tests, operational tests, strength tests and
finish tests are included.
1.2 Tests described in this Standard are performed under laboratory
conditions. In actual usage, results…
This National Standard of Canada is equivalent to American National Standard
ANSI/BHMA A156.13-1987.
1.1 This Standard establishes requirements for Mortise Locks and Latches and
includes operational tests, security tests, cycle tests, finish tests, and
dimensional criteria.
1.2 Tests described in this Standard are performed under laboratory
conditions. In actual usage, results may…
This national Standard of Canada is equivalent to American national Standard
ANSI/BHMA A156.14-1991.
1.1 This Standard establishes requirements for Sliding and Folding Door
Hardware. Cycle tests, static load, static friction, kinetic friction and
finish tests are included. Hardware for light to very heavy doors is covered
including both residential and industrial applications.
1.2…
1.1 All exit devices shall be listed or labeled by a nationally recognized
independent testing laboratory and be subject to periodic examination service.
1.2 Exit devices are available in Grades 1 and 2, both suitable for all
classes of buildings and are based on the performance tests listed.
1.3 The cycling requirements listed are not to be considered as being in
addition to the one…
La présente norme nationale du Canada est équivalente à la norme national
américaine ANSI/BHMA A156.3-1984.
1.1
Tous les dispositifs d'ouverture de porte d'issue doivent être listés ou
étiquetés par un laboratoire d'essai indépendant reconnu sur le plan national
et être soumis à des inspections périodiques.
1.2
Les dispositifs d'ouverture de porte d'issue sont…
