Air quality — Evaluation of the suitability of a measurement procedure by comparison with a required...
This International Standard specifies, for the field of air quality measurement procedures, the:
estimation of measurement uncertainty from actual or claimed values of all important performance characteristics of a method under stationary conditions; assessment of whether or not specified values for these performance characteristics comply with the required quality of a measured value at a…
Electromagnetic Compatibility (EMC) - Part 4-17: Testing and Measurement Techniques - Ripple on d.c....
This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-17:1999 (first edition, 1999-06), including Amendment 1:2001.
1 Scope
This part of IEC 61000 defines test methods for immunity to ripple at the d.c. input power port of electrical or electronic equipment.
This standard is applicable to low-voltage d.c. power ports of equipment supplied by external…
Road vehicles — Braking systems — Temperature measuring methods
ISO/PAS 12158 presents methods for measuring the temperature of braking systems in road vehicles. It is applicable to both disc and drum brakes fitted on passenger cars and commercial vehicles, and its methods are suitable for either dynamometer tests in the laboratory or vehicle tests on road and track.
Plastic Nonpressure Pipe Compendium - B1800 Series
CAN/CSA-B181.1-02
ABS Drain, Waste, and Vent Pipe and Pipe Fittings
1. Scope
1.1
This Standard applies to acrylonitrile-butadiene-styrene drain, waste, and vent (ABS-DWV) pipe, pipe fittings, and accessories such as factory-assembled expansion joints, closet flanges, and backwater valves.
1.2
This Standard includes requirements for materials, quality of work, dimensions and tolerances…
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient ...
This part of ISO 10846 specifies a method for determining the dynamic transfer stiffness for translations of resilient supports, under specific preload. The method concerns the laboratory measurements of vibration transmissibility and is called the indirect method. This method is applicable to test elements with parallel flanges.
Measurements for translations normal and transverse to the flanges…
Rubber condoms for clinical trials — Measurement of physical properties
This International Standard is intended as a guideline for clinical researchers working with condoms. It suggests a
series of laboratory tests to be conducted on the products to be used in any clinical investigation, so that it will be
easier to relate the clinical results to the design and quality of the condoms used.
This International Standard is not applicable to the design of clinical…
Coaxial connectors used in nuclear laboratory instrumentation
Recommends a limited family of preferred standard coaxial connectors for nuclear laboratory instruments. Applies to coaxial connectors for electrical instruments used in nuclear laboratories.
Practice for characterization and performance of a high-dose radiation dosimetry calibration laborat...
ISO/ASTM 15400 describes the characterization and performance criteria to be met by a high-dose radiation dosimetry calibration laboratory. By meeting these criteria, the laboratory may be accredited by a recognized accreditation organization. Adherence to these criteria will ensure high standards of performance and instill confidence that the accredited laboratory is competent to provide…
