Search

This National Standard of Canada is based on International Standard ISO 10079-3:1999 (second edition, 1999-08-15). 1 Scope This part of ISO 10079 specifies safety and performance requirements for medical suction equipment powered from a vacuum or pressure source (see Figure 1). In particular it applies to connections for pipelines and Venturi attachments. Suction equipment with components…

1. INTRODUCTION 1.1 This laboratory guide has been developed for the assessment of volatile organic compound emissions from polyurethane foam. It outlines a test procedure for the determination of volatile organic compounds from the foam and explains why certain test conditions have been selected. Upon agreement between the purchaser and the manufacturer, this test method may be used for…

ISO 16140:2003 defines the general principle and the technical protocol for the validation of alternative methods in the field of microbiological analysis of food, animal feeding stuffs and environmental and veterinary samples for the validation of alternative methods which can be used in particular in the framework of the official control, and the international acceptance of the results obtained…

ISO 15011-2:2003 provides guidance on the determination of emission rates of gases generated by arc welding using a fume box technique. It describes the test principle, gives a possible fume box arrangement and considers methods for sampling and analysis. The following gases that can be produced during arc welding are covered: - carbon monoxide (CO); - carbon dioxide (CO2); - nitrogen oxide (NO…

ISO 10381-4:2003 describes the sampling of soils of natural and near-natural sites;areas used for agriculture (arable and pasture sites);areas used for horticulture (including domestic gardens, allotments);areas used for special crop-cultivation, arboreal, vineyard, etc.;forest areas and woods. It is applicable to soil investigations and evaluations in the field;chemical, geochemical, physical,…

This part of IEC 61010 is a technical report, which provides a test protocol to assist with determining and recording verification of conformity of the equipment under test with the reference documents identified on the front cover of the appropriate report.

ISO 18922:2002 is applicable to evaluating the scratch resistance of dry, processed photographic film. It specifies two test methods for evaluating the scratch resistance on either the emulsion or the base side. The two test methods usually give comparable results. It provides empirical laboratory tests made under controlled conditions, but does not necessarily predict the actual scratch…

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is to assist users of the standard with determining and recording verification of conformity of the equipment under test with the requirements of: IEC 61010-2-081: 2001The protocol for completion of this report is contained in publication IEC 61010…

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is to assist users of the standard with determining and recording verification of conformity of the equipment under test with the requirements of: IEC 61010-2-101: 2002 The protocol for completion of this report is contained in publication IEC…

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is to assist users of the standard with determining and recording verification of conformity of the equipment under test with the requirements of: IEC 61010-1: 2001 2nd edition The protocol for completion of this report is contained in publication…