Search

ISO/TS 21098:2005 defines the principles and specifies the nature of the information to be supplied for acceptance of a method as an annex to ISO 21569, ISO 21570 or ISO 21571. It also specifies the process for adding, amending and retaining methods annexed to these standards. ISO/TS 21098:2005 is necessary in order to attain consistency in methods that are to be employed as part of the standards…

ISO/TR 9272:2005 presents guidelines for determining, by means of interlaboratory test programmes (ITPs), precision for test method standards used in the rubber manufacturing and the carbon black industries. It uses the basic one-way analysis of variance calculation algorithms of ISO 5725 and as many of the terms and definitions of ISO 5725 as possible that do not conflict with the past history…

ISO 5834-3:2005 specifies a test method for investigating the oxidative stability of ultra-high-molecular-weight polyethylene (UHMWPE) materials as a function of processing and sterilization method. ISO 5834-3:2005 describes a laboratory method for accelerated ageing of UHMWPE specimens and components for total joint prostheses. The UHMWPE is aged at elevated temperature and at elevated oxygen…

ISO/IEC 22536:2005 is part of a suite of standards that specify tests for ISO/IEC 18092. It defines test methods for the RF-interface. ISO/IEC 22536:2005 specifies RF-test methods for NFC devices with antennas fitting within the rectangular area of 85 mm by 54 mm. This test standard, the first of two parts, specifies compliance tests for the RF interface of ISO/IEC 18092 devices. The companion…

ISO/IEC 22536:2005 is part of a suite of standards that specify tests for ISO/IEC 18092. It defines test methods for the RF-interface. ISO/IEC 22536:2005 specifies RF-test methods for NFC devices with antennas fitting within the rectangular area of 85 mm by 54 mm. This test standard, the first of two parts, specifies compliance tests for the RF interface of ISO/IEC 18092 devices. The companion…

ISO 7141:2005 specifies a laboratory test procedure to evaluate the axial (lateral) kerb impact collision properties of a wheel manufactured either wholly or partly of light alloys. It is intended for passenger car applications, and special vehicle applications where the wheel may impact the kerb, with the purpose of screening and/or quality control of the wheel.

1. SCOPE 1.1 This method of test is applicable to firestop systems with or without penetrating items. These firestop systems are intended for use in openings in fire resistive wall and floor assemblies and membranes forming part of an assembly required to have a fire resistance rating and linear openings between adjacent fire resistive floor assemblies, wall assemblies or both.1.2 Tests…

1. SCOPE 1.1 This method is intended for the semi-quantitative (i.e., ±25%1) determination of ethyl mercaptan odourant (within the range of 5 to 85 mg/L) in liquid propane. It is important to confirm that recently stenched propane is odourized to the required level. The method is intended for field application and may be suitable for use by non-laboratory personnel after suitable training. A…

ISO 6270-2:2005 describes the general conditions and procedures which need to be observed when testing coated test specimens in constant condensation-water atmospheres or in alternating condensation-water atmospheres, in order to ensure that the results of tests carried out in different laboratories are reproducible. It does not cover the shape and preparation of the test specimens, the duration…