Search

The particular requirements of this part of IEC 60364 apply to the electrical installations in locations containing a fixed bath (bath tub) or shower and to the surrounding zones as described in this standard. This standard does not apply to emergency facilities, e.g. emergency showers used in industrial areas or laboratories.

1 Scope 1.1 Glued-laminated timber (Glulam) is an engineered wood product requiring precise manufacturing at all stages of fabrication. The finished product can only be tested under laboratory conditions; therefore, quality control of manufacturing is necessary to ensure that the properties of Glulam are commensurate with the specified strengths assigned to Glulam in accordance with CAN/CSA-…

ISO 16000-9:2006 specifies a general laboratory test method for determination of the area specific emission rate of volatile organic compounds (VOCs) from newly produced building products or furnishing under defined climate conditions. The method can also, in principle, be applied to aged products. The emission data obtained can be used to calculate concentrations in a model room. ISO 16000-9:…

ISO 24276:2006 specifies how to use the standards for sampling strategies (EN/TS 21568), nucleic acid extraction (ISO 21571), qualitative nucleic acid analysis (ISO 21569) and quantitative nucleic acid analysis (ISO 21570), and their relationship in the analysis of genetically modified organisms in foodstuffs, and contains general definitions, requirements and guidelines for laboratory set-up,…

ISO 4892-2:2006 specifies methods for exposing specimens to xenon-arc light in the presence of moisture to reproduce the weathering effects that occur when materials are exposed in actual end-use environments in daylight or daylight filtered through window glass. The specimens are exposed to filtered xenon-arc light under controlled conditions (temperature, humidity and/or wetting). Various types…

ISO 16000-10:2006 specifies a general laboratory test method for determination of the area specific emission rate of volatile organic compounds (VOCs) from newly produced building products or furnishing under defined climate conditions. The method can also, in principle, be applied to aged products. The emission data obtained can be used to calculate concentrations in a model room. According to…

ISO 8083:2006 establishes a consistent, reproducible means of evaluating characteristics of falling-object protective structures (FOPS) under loading, and prescribes performance requirements for a representative specimen under such loading. It is applicable to mobile or self-propelled specially designed forestry machines as defined in ISO 6814.

ISO Guide 35:2006 gives statistical principles to assist in the understanding and development of valid methods to assign values to properties of a reference material, including the evaluation of their associated uncertainty, and establish their metrological traceability. Reference materials (RMs) that undergo all steps described in ISO Guide 35:2006 are usually accompanied by a certificate and…

ISO 16784-2:2006 applies to corrosion and fouling in industrial cooling water systems ISO 16784-2:2006 describes a method for preliminary evaluation of the performance of treatment programmes for open recirculating cooling water systems. It is based primarily on laboratory testing but the heat exchanger testing facility can also be used for on-site evaluation. ISO 16784-2:2006 does not include…

ISO/TR 18112:2006 summarizes regulatory requirements and associated guidance for information supplied by the manufacturer with IVD medical devices intended for professional use. Information supplied by the manufacturer includes labels on the outer and immediate container as well as instructions for use. Current labelling regulations and regulatory guidance from Canada, the European Union, Japan…