Acoustics — Measurement of sound insulation in buildings and of building elements — Part 18: Laborat...
ISO 140-18:2006 specifies a laboratory method of measurement of the impact sound insulation of roofs, roof/ceiling systems and skylights excited by artificial rainfall. The results obtained can be used for assessing the noise to be produced by rainfall on a given building element in the room or space below. The results can also be used to compare rainfall sound insulation capabilities of building…
Plastics — Determination of ignition temperature using a hot-air furnace
ISO 871:2006 specifies a laboratory method for determining the flash-ignition temperature and spontaneous-ignition temperature of plastics using a hot-air furnace. It is one of a number of methods in use for evaluating the reaction of plastics to the effects of ignition sources.
The method described does not give a direct measure of the combustibility or rate of burning of a material or any…
Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infecti...
ISO 20776-1:2006 describes one reference method, broth microdilution, for determination of MICs. The MIC reflects the activity of the drug under the described test conditions, and can be interpreted for clinical management purposes by taking into account other factors, such as drug pharmacology or bacterial resistance mechanisms. This allows categorization of bacteria as susceptible (S),…
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscilla...
This part of IEC 61000-4 relates to the immunity requirements and test methods for electrical and electronic equipment, under operational conditions, with regard to: a) repetitive damped oscillatory waves occurring mainly in power, control and signal cables installed in high voltage and medium voltage (HV/MV) substations; b) repetitive damped oscillatory waves occurring mainly in power, control…
Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1:...
ISO 2846-1:2006 specifies the colour and transparency characteristics that have to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. The specified printing conditions (which use a laboratory printability tester), the defined substrate and a method for testing to ensure conformance are also defined. Characteristics are specified for…
Qualification Code for Concrete Testing Laboratories
1 Scope
1.1
This Standard provides a means of determining a concrete laboratory's capability to test concrete and related materials. It also provides minimum qualification requirements for personnel who test concrete.
1.2
This Standard addresses
(a) the requirements for laboratory certification; and
(b) the administration of these requirements.
1.3
In CSA Standards, "shall…
B181.0-06
Definitions, general requirements, and methods of testing for
thermoplastic nonpressure piping
1 Scope
1.1
This Standard covers thermoplastic nonpressure piping, including
(a) drain, waste, and vent pipe and pipe fittings;
(b) sewer and storm pipe and pipe fittings; and
(c) accessories such as factory-assembled expansion joints, closet flanges, backwater valves, and…
Electroacoustics - Sound level meters - Part 3: Periodic tests
Describes procedures for periodic testing of conventional, integrating-averaging, and integrating sound level meters conforming to the class 1 or class 2 requirements of IEC 61672-1:2002. The aim of the standard is to ensure that periodic testing is performed in a consistent manner by all testing laboratories.
The purpose of periodic testing is to assure the user that the performance of a sound…
