Search

ISO/TS 19700:2007 describes a tube-furnace method for the generation of fire effluent for the identification and measurement of its constituent combustion products, in particular, the yields of toxic products under a range of fire decomposition conditions. The test method described in ISO/TS 19700:2007 can be used solely to measure and describe the properties of materials, products or systems in…

ISO 212:2007 gives the general rules for the sampling of essential oils, in order to provide a laboratory with quantities that are suitable to be handled for expertise purposes.

1 Scope 1.1 This Standard specifies test criteria for evaluating the following characteristics of single-use and reusable medical sharps containers for biohazardous and cytotoxic waste: (a) materials of construction; (b) colour; (c) lifespan of reusable containers; (d) puncture resistance; (e) fill capacity and fill capacity indicator; (f) overfill protection; (g) needle unwinders; (h) handle…

This National Standard of Canada is based on International Standard CEI/IEC 60044-2:1997 + A1:2000 + A2:2002. 1.1 Scope This part of IEC 60044 applies to new inductive voltage transformers for use with electrical measuring instruments and electrical protective devices at frequencies from 15 Hz to 100 Hz. Although this standard relates basically to transformers with separate windings, it…

1 Scope and object 1.1 Scope This part of IEC 61010 applies to hand-held and hand-manipulated PROBE ASSEMBLIES of the types described below, and related accessories which are intended for professional, industrial process, and educational use. These PROBE ASSEMBLIES are for use in the interface between an electrical phenomenon and test or measurement equipment. They may be fixed to the equipment…

This National Standard of Canada is equivalent to International Standard ISO 9919:2005. 1 Scope IEC 60601-1:1988, Clause 1 applies, except as follows. Amendment (add at the end of 1.1): This International Standard specifies particular requirements for the basic safety and essential performance of pulse oximeter equipment intended for use on humans. This includes any part necessary for normal…

1 Scope 1.1 This Standard describes the test procedures, apparatus, and calculations required to determine the performance, capacities, energy consumption, and overall efficiency of residential gas-fired integrated mechanical systems that perform all of the following functions: (a) space heating; (b) potable water heating; (c) ventilation with heat recovery; and (d) air circulation and…

Specifies oil-sampling procedures, analysis requirements and procedures, and recommends sensitivity, repeatability and accuracy criteria for the application of dissolved gas analysis (DGA) to factory testing of new power transformers, reactors and instrument transformers filled with mineral insulating oil when DGA testing has been specified. The most effective and useful application of DGA…

ISO 6690:2007 specifies mechanical tests for milking machine installations in order to verify compliance of an installation or component with the requirements of ISO 5707. It also stipulates the accuracy requirements for the measuring instruments. ISO 6690:2007 is applicable for testing new installations and for periodic checking of installations for efficiency of operation. Alternative test…

ISO/IEC 24709-2:2007 defines a number of test assertions written in the assertion language specified in ISO/IEC 24709-1. These assertions enable a user of ISO/IEC 24709-2:2007 (such as a testing laboratory) to test the conformance to ISO/IEC 19784-1 (BioAPI 2.0) of any biometric service provider (BSP) that claims to be a conforming implementation of that International Standard. Each test…