Search

ISO 6914:2008 describes three methods for the measurement of the change of stress in a test piece at a given elongation for the purpose of determining the ageing characteristics of a rubber. Method A is intended for measurement under continuous strain conditions. Method B is the preferred method for measurement under intermittent strain conditions. In the case of both methods A and B, a stress…

ISO 21243:2008 is to give an overview of the minimum requirements of process and quality-control components of the cytogenetic response for triage of mass casualties. Cytogenetic triage is the use of chromosome damage to evaluate approximately and rapidly radiation doses received by individuals in order to supplement the early clinical categorization of casualties. ISO 21243:2008 concentrates on…

ISO 3471:2008 specifies performance requirements for metallic roll-over protective structures (ROPS) for earth-moving machinery, as well as a consistent and reproducible means of evaluating the compliance with these requirements by laboratory testing using static loading on a representative specimen. ISO 3471:2008 is applicable to ROPS intended for the following mobile machines with seated…

ISO 10846-1:2008 explains the principles underlying ISO 10846-2, ISO 10846-3, ISO 10846-4 and ISO 10846-5 for determining the transfer properties of resilient elements from laboratory measurements, and provides assistance in the selection of the appropriate part of this series. It is applicable to resilient elements that are used to reduce the transmission of audiofrequency vibrations (structure-…

ISO 10846-2:2008 specifies a method for determining the dynamic transfer stiffness for translations of resilient supports, under specified preload. The method concerns the laboratory measurement of vibrations on the input side and blocking output forces and is called “the direct method.” The method is applicable to test elements with parallel flanges (see Figure 1). Resilient elements, which are…

ISO 10846-5:2008 specifies a driving point method for determining the low-frequency transfer stiffness for translations of resilient supports, under a specified preload. The method concerns the laboratory measurement of vibrations and forces on the input side with the output side blocked, and is called the “driving point method”. The stiffness resulting from measuring the input displacement (…

THIS STANDARD SUPERSEDES PART B45.1-02 of B45 SERIES-02. 1 Scope 1.1 This Standard covers vitreous and non-vitreous china plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings. This Standard#s performance requirements and test procedures apply to all types of water closets and urinals that discharge into gravity drainage systems in…

THIS STANDARD SUPERSEDES PART B45.4-02 of B45 SERIES-02. 1 Scope 1.1 This Standard covers plumbing fixtures made of stainless steel alloys and specifies requirements for materials, construction, performance, testing, and markings. Note: The term #corrosion-resisting steel# is also applied to stainless steel. 1.2 This Standard covers the following plumbing fixtures: (a) bathtubs; (…

ISO 15181-4:2008 specifies the apparatus and analytical method for determining the amount of pyridine-triphenylborane (PTPB) that has been released from an antifouling paint into artificial seawater in accordance with the procedure given in ISO 15181‑1. It determines the PTPB concentration in the artificial seawater extract and gives the final calculation for the release rate of PTPB under the…

ISO/TR 12116:2008 describes four methods designed to simulate, by means of laboratory colour-fastness tests, the colour changes which take place in clothing during actual wear. The four methods are applicable to the following types of clothing: sports clothing (method 1); smocks and other shirt-like outer garments worn outdoors (method 2); indoor clothing and underwear (method 3); military…