Textile floor coverings — Determination of electrical resistance
ISO 10965:2011 describes a laboratory method for the determination of the electrical resistance of textile floor coverings. The method includes both horizontal and vertical measurements.
Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light source for testin...
ISO 10677:2011 describes an ultraviolet (UV) light source and specifies a method of measuring the radiation intensity which is used in testing the performance of semiconducting photocatalytic materials in a laboratory.
Methods of measurement of the suppression characteristics of passive EMC filtering devices
CISPR 17:2011 specifies methods to measure the radio interference suppression characteristics of passive EMC filtering devices used in power and signal lines, and in other circuits. The defined methods may also be applied to combinations of over-voltage protection devices and EMC filtering devices. The measurement method covers the frequency range from 9 kHz to several GHz depending on the device…
1.1 This method of test is applicable to firestop systems with or without penetrating items such as cables,
cable trays, conduits, ducts and pipes. These firestop systems are intended for use in openings in fire
resistive wall and floor assemblies and membranes forming part of an assembly required to have a fire
resistance rating and linear openings between adjacent fire resistive floor…
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10: Percus...
ISO 28927-10:2011 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power driven percussive machines with and without rotary action [portable rock drills, plug hole drills, rotary hammers, breakers (e.g. pavement breakers, concrete breakers or road breakers), riveting hammers, chipping hammers, pick hammers or similar]. It is a type-test…
1.1 This Standard covers requirements for control units, fire alarm systems and control unit accessories
for use in accordance with the Standard for the Installation of Fire Alarm Systems, CAN/ULC-S524, in
accordance with Rule 32-004(1) of C22.1, Safety Standard for Electrical Installations, Canadian Electrical
Code, Part I; and the National Building Code of Canada.
1.2 This Standard also…
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast...
IEC 61000-4-4:2004+A1:2010 Establishes a common and reproducible reference for evaluating the immunity of electrical and electronic equipment when subjected to electrical fast transient/bursts on supply, signal, control and earth ports. The test method documented in this part of IEC 61000-4 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon…
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscilla...
IEC 61000-4-18:2006+A1:2010 relates to the immunity requirements and test methods for electrical and electronic equipment, under operational conditions, with regard to:
a) repetitive damped oscillatory waves occurring mainly in power, control and signal cables installed in high voltage and medium voltage (HV/MV) substations;
b) repetitive damped oscillatory waves occurring mainly in power,…
