Search

ISO 22029:2012 presents a simple format for the exchange of digital spectral data that has been designated as an EMSA/MAS standard. This format is readable by both humans and computers and is suitable for transmission through various electronic networks, the phone system (with modems) or on physical computer storage devices (such as removable media). The format is not tied to any one computer,…

ISO 9772:2012 specifies a small-scale laboratory screening procedure for comparing the relative burning characteristics of horizontally oriented, small cellular plastic specimens, having a density less than 250 kg/m3, when exposed to an ignition source. This method of test is intended for quality assurance and limited product evaluation of cellular plastic materials under controlled laboratory…

ISO 29661:2012 defines terms and fundamental concepts for the calibration of dosemeters and equipment used for the radiation protection dosimetry of external radiation -- in particular, for beta, neutron and photon radiation. It defines the measurement quantities for radiation protection dosemeters and doserate meters and gives recommendations for establishing these quantities. For individual…

ISO 18437-1:2012 establishes the principles underlying ISO 18437-2 to ISO 18437-5 for the determination of the dynamic mechanical properties (i.e. elastic modulus, shear modulus, bulk modulus, loss factor, and Poisson ratio) of isotropic visco-elastic resilient materials used in vibration isolators from laboratory measurements. It also provides assistance in the selection of the appropriate part…

Scope 1.1 Structures, systems, and components requiring seismic qualification This Standard defines the processes and requirements for performing seismic qualification by testing and presents the test methods that may be used for the seismic qualification of the nuclear power plant structures, systems, and components (SSCs). Seismic qualification by testing is typically used for SSCs that…

This International Standard specifies laboratory procedures for measuring the mineralization and nitrification of nitrogen by the soil microbiota. For investigations on the evaluation of soil quality or on effects of contamination, a procedure is given to measure the rates and extent of N-mineralization in soil or soils of known or unknown quality. For investigation of the potential toxicity of…

IEC 62585:2012 provides information on the corrections required over a range of frequencies in order for a periodic test of a sound level meter to be performed according to IEC 61672-3. These corrections include; corrections for the typical effects of reflections from the case of the sound level meter and diffraction of sound around the microphone; corrections for the deviation of the typical…

ISO 13160:2012 specifies the test methods and their associated principles for the measurement of the activity of 90Sr in equilibrium with 90Y, and 89Sr, pure beta-emitting radionuclides, in water samples. Different chemical separation methods are presented to produce strontium and yttrium sources, the activity of which is determined using a proportional counter (PC) or liquid scintillation…

ISO/TS 15011-6:2012 provides guidance on determination of emission rates of fume and gases generated by spot welding of uncoated and coated steel sheets, expressed as the quantity of pollutants per spot weld. It describes the test principle and considers methods for sampling and analysis. ISO/TS 15011-6:2012 can be used for determining the influence of the type of material, the coating system,…