Index of electrical measuring apparatus used in connection with ionizing radiation
Applies to mobile radio receivers having audio-frequency bandwidths generally not exceeding 10 kHz for the reception of voice and other types of signals using:
a)angle (Type G or F: phase/frequency) modulation, or
b)double-sideband amplitude (Type A) modulation with full carrier, or
c)single-sideband amplitude (Type H, J or R) modulation with full, reduced or suppressed carrier.
Standardizes the…
1. Scope
1.1 This Standard applies to electrically operated clothes-washing* and
dishwashing* machines including such washing machines in combination with other
devices (such as combination washing and drying machines*) for potentials of
600 volts or less, intended to be used in accordance with the rules of the
Canadian Electrical Code, Part I.
*For convenience only, the short terms "…
Applies both to capacitor units and capacitor banks intended to be used connected in series with an a.c. transmission or distribution line or circuit forming part of an a.c. power system having a frequency of 15 Hz to 60 Hz. The series capacitor units and banks are usually intended for high voltage power systems. This standard is applicable to the complete voltage range.
Note: For internal…
1. SCOPE
1.1 This Specification applies to complete flue-connected oil burning stoves
incorporating oil burners of the vapourizing-type.
1.2 The requirements given herein apply to circulating and radiant room
heaters, ranges, and combination ranges, as defined in this Specification.
Note: The following related appliances are covered by other CSA Standards:
(a) Mobile hone…
Quartz crystal units for oscillators - Part 3: Standard outlines
Loose-leaf booklet containing standard outlines and pin connections. Thirty-four standard sheets are included and supplements will be issued as new outlines are developed.
Toggler switches - Part 1: General requirements and measuring methods
Applies to lever switches for use in electronic and electromechanical equipment, including switches necessary to connect the supply mains. Switches covered by this standard have a maximum rated voltage not exceeding 500 V and a maximum rated current not exceeding 25 A (d.c. or a.c. r.m.s. values).
Establishes uniform specifications and type test requirements for lever switches also establish…
1. SCOPE
1.1 This Specification applies to cord-connected room air conditioners rated
not more that 250 volts, single phase, 20 amperes, designed to be used in
accordance with the Rules of Canadian Electrical Code, Part I.
1.2 This Specification applies to self-contained air-cooled window, or console
or built-in-wall type room air conditioners, which have hermetic-type
condensing…
