Small medical gas cylinders — Pin-index yoke-type valve connections
Specifies: basic dimensions, requirements for alternative designs, dimensions and positions for the holes and pins for the outlet connections. This second edition cancels and replaces the first edition (1983).
Fiches, prises et connecteurs pour réseaux de télécommunication
1. Domaine d'application
1.1 La présente norme s'applique aux fiches, aux prises et aux connecteurs pour réseaux de télécommunication destinés au raccordement électrique:
(a) des cordons de transmission fixes;
(b) des cordons de transmission amovibles; ou
(c) de tout matériel connecté à une section à découvert d'un système de télécommunication ou à un réseau de…
1. Scope
1.1 This Standard applies to modular wiring systems combined with the office furniture in which they are intended to be used.
1.2 This Standard applies to equipment intended to be connected to one or more supply circuits at a nominal system voltage of 120 V to ground, and a maximum rating of 20 A per circuit, for use in nonhazardous locations, in accordance with the Rules of the…
Information Technology - Telecommunications and Information Exchange Between
Systems - Protocol Com...
This National Standard of Canada is equivalent to International Standard
ISO/IEC 8880-2:1990.
1.1 Scope
This part of ISO/IEC 8880 describes the provision and support of the
Connection-mode Network Service defined in ISO 8348. The field of application
of ISO/IEC 8880-2 is the environments defined in 1.5.
1.1 Covers the design and construction of Type B (round or oval) and Type Bw
Gas Vents. Type B Gas Vents are intended for the venting of flue gases having
temperatures not exceeding 245 degrees C, from gas-fired appliances certified
with draft hoods or diverters. Type BW Gas Vents are intended for the venting
of flue gases from gas-fired wall furnaces and the maximum input to a Type Bw
Gas…
Audio, video and audiovisual systems - Interconnections and
matching values - Part 2: 21-pin connect...
Gives the requirements for interconnections between equipment in a
household video system to ensure compatibility between equipment
from different manufacturers. The pin connections differ from those
of IEC 60933-1 and the application of this report is confined to
Japan.
Equipment for crop protection — Sprayers — Connecting dimensions for nozzles with bayonet fixing
Specifies the dimensions necessary to allow interchangeability. Figure 1 illustrates the dimensions of concern. For the dimensions of the nozzle body see ISO 8169.
Single-Phase and Three-Phase Distribution Transformers, Types ONAN and LNAN
1.1
This Standard specifies the requirements for distribution transformers intended
primarily for operation by electric utilities.
Note: The operation of transformers complying with this Standard, by other
than an electric utility, may be subject to additional requirements by the
electrical inspection authority having jurisdiction under Part I of the
Canadian Electrical Code.
1.2
This…
