Search

Scope 1.1 This Standard applies to spas, hot tubs, and associated equipment intended for residential and commercial use indoors or outdoors in nonhazardous locations, installed in accordance with the Rules of the Canadian Electrical Code, Part I, and connected a) permanently to an electrical circuit of 250 V or less (i.e., a maximum of 150 volts-to-ground); or b) by a factory-provided supply…

1 Scope [Insert the following sentence at the beginning of Note 101] This Standard covers both permanently connected and cord-connected room heaters. [Add the following] This Standard applies to the safety of such equipment designed and constructed for installation and use in accordance with the Rules of the Canadian Electrical Code (CEC), Part I. Products covered by the scope of this…

1 Scope This Standard covers both permanently connected and cord-connected clothes dryers and towel rails. This Standard applies to the safety of such equipment designed and constructed for installation and use in accordance with the Rules of the Canadian Electrical Code (CEC), Part I. Products covered by the scope of this Standard are also subject to the requirements of CAN/CSA-C22.2 No…

1 Scope This Standard covers both permanently connected and cord-connected amusement machines and personal service machines. This Standard applies to the safety of such equipment designed and constructed for installation and use in accordance with the Rules of the Canadian Electrical Code (CEC), Part I. Products covered by the scope of this Standard are also subject to the requirements…

1 Scope [Insert the following sentence at the beginning of Note 101] This Standard covers both permanently connected and cord-connected pumps. [Add the following note after Note 101] Note 101A: In Canada, this Standard does not apply to the swimming pool pumps of the submersible type or the non-submersible type. [Add the following] This Standard applies to the safety of such equipment…

ISO 16844-1:2013 gives the dimensions and tests and requirements for the performance of electrical connectors needed for ensuring the interchangeability of different components of the tachograph systems used for road vehicles in accordance with Council Regulation (EEC) No. 3821/85 on recording equipment in road transport. In particular, ISO 16844-1:2013 specifies the connectors used to connect…

ISO 2974:2013 specifies the dimensional requirements of end-connections for high-pressure fuel injection equipment components used on diesel (compression-ignition) engines. It is applicable to externally threaded 60° female cones and intended for use with high-pressure fuel injection pipe assemblies with tube outside diameters of up to and including 12 mm for integral female cones, and up to and…

ISO/IEC 14165-313:2013(E) defines a set of features necessary to implement a real-time fibre channel network (switched fabric or arbitrated loop) supporting the FC-AE-ASM Upper Level Protocol. Fibre Channel Avionics Environment is a group of protocols and profiles that specify Fibre Channel options for devices connected by fabric and/or loop topologies that are pertinent to their use in…

IEC/TR 61850-90-7:2013(E) describes the functions for power converter-based distributed energy resources (DER) systems, focused on DC-to-AC and AC-to-AC conversions and including photovoltaic systems (PV), battery storage systems, electric vehicle (EV) charging systems, and any other DER systems with a controllable power converter. It defines the IEC 61850 information models to be used in the…

ISO/IEC 14165-313:2013(E) defines a set of features necessary to implement a real-time fibre channel network (switched fabric or arbitrated loop) supporting the FC-AE-ASM Upper Level Protocol. Fibre Channel Avionics Environment is a group of protocols and profiles that specify Fibre Channel options for devices connected by fabric and/or loop topologies that are pertinent to their use in…