Search

Scope 1.1 This Standard applies to open-type (fused and solid-blade) cutouts with a polymeric insulator structure component. These cutouts are intended for operation on alternating current distribution systems. 1.2 In some cases, specific types of construction are envisaged. This does not preclude the use of other types of construction, provided that the engineering representatives…

Scope 1.1 This Standard describes testing procedures and states the performance requirements for general service incandescent and tungsten halogen reflector lamps. 1.2 This Standard includes performance requirements for (a) wattage; (b) lamp efficacy; (c) rated luminous flux; (d) centre beam intensity; and (e) rated life. 1.3 This Standard applies to incandescent and tungsten halogen reflector…

Preface This is the first edition of CAN/CSA-C22.2 No. 60601-1-10, Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard…

ISO/IEC TR 20000-3:2009 provides guidance on scope definition, applicability and demonstration of conformance for service providers aiming to meet the requirements of ISO/IEC 20000-1, or for service providers who are planning service improvements and intending to use ISO/IEC 20000 as a business goal. It can also assist service providers who are considering using ISO/IEC 20000-1 for implementing a…

ISO/IEC TR 20000-3:2009 provides guidance on scope definition, applicability and demonstration of conformance for service providers aiming to meet the requirements of ISO/IEC 20000-1, or for service providers who are planning service improvements and intending to use ISO/IEC 20000 as a business goal. It can also assist service providers who are considering using ISO/IEC 20000-1 for implementing a…

IEC 61347-2-9:2000+A1:2003+A2:2009 specifies particular safety requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. The standard covers inductive-type ballasts for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, associated with discharge lamps, having rated wattages, dimensions and…

IEC 60112:2003+A1:2009 Specifies the method of test for the determination of the proof and comparative tracking indices of solidinsulating materials on pieces taken from parts of equipment and on plaques of material using alternating voltages. The standard provides for the determination of erosion when required. Test results cannot be used directly for the evaluation of safe creepage distances…

ISO/IEC 26513:2009 supports the interest of software users in receiving consistent, complete, accurate, and usable documentation. It defines the process in which user documentation products are tested. ISO/IEC 26513:2009 is intended neither to encourage nor discourage the use of either printed or electronic (on-screen) media for documentation, or of any particular documentation testing or…

ISO/IEC 26513:2009 supports the interest of software users in receiving consistent, complete, accurate, and usable documentation. It defines the process in which user documentation products are tested. ISO/IEC 26513:2009 is intended neither to encourage nor discourage the use of either printed or electronic (on-screen) media for documentation, or of any particular documentation testing or…

B137.0-09 Definitions, general requirements, and methods of testing for thermoplastic pressure piping 1 Scope 1.1 This Standard specifies requirements for thermoplastic pressure piping. It includes reference publications, definitions, abbreviations, general requirements for materials and manufactured pipe and fittings, relevant test methods, and marking requirements. Note: The terms "pipe…