Search

1. Scope 1.1 This Standard outlines the requirements for seismic instrumentation systems for nuclear power plants where site- specific seismic responses are required to be determined and recorded.

For specific information see individual standards in the series.

1. Scope 1.1 This Standard applies to multiple-conductor control and instrumentation cable Types CIC and ACIC having a voltage rating not exceeding 600 v and intended for installation in accordance with the Canadian Electrical Code, Part I. 1.2 Specifically, this Standard applies to cables rated 600 V, 300 V, and 150 V. 1.3 The maximum temperature rating of the cables covered by…

1.1 This specification applies to salted, dried, smoked or pickled fish. It is intended to be used by food services in the procurement of food. 1.2 This specification does not cover detailed requirements on sampling, examination or lot acceptance, nor does it cover all definitions of defects since they are given in detail in the applicable inspection and product standards manuals by the…

This National Standard of Canada is based on International Standard ISO 1100-1:1981. 1.1 The standard gives requirements and recommendations concerning the establishment and operation of a gauging station on a lake, reservoir, river or artificial open channel for the measurement of stage or discharge or both. It is based on the International Standard ISO 1100/1, having the same title. An…

States and defines the principal performance characteristics of household electric tumbler dryers of interest to users and describes the standard method for measuring these characteristics. Applies to household electric tumbler dryers of the automatic and non-automatic type, with or without cold water-supply and incorporating a heating device.

The procedures specified are applicable to the inspection of: end items, components and raw materials, services, materials in process, supplies in storage, data or records, administrative procedures. Annexes A and B form an integral part of this standard. Annexes C and D are for information only.

Specifies four types of standard connectors. Type A: connector with two or three outlets; Type B: connector with four or five outlets; Type C: connector with four outlets and electrical contacts; Type D: connector with three outlets and connection thread M12 x 0,5.

It has the status of a horizontal standard in accordance with IEC Guide 108.

This guide is applicable to instrumentation intended for measuring voltage or current components with frequencies in the range of d.c. to 2 500 Hz which are superimposed on the voltage or current at the power supply frequency. This guide is also applicable to measurement instrumentation intended for testing individual items of equipment in accordance with emission limits given in standards as…