Search

This standard applies to the dimensions considered essential to provide for the fit of "basic" coats, with double lining (not zip-out lining) for wear by juniors (CSS Juniors' Range Sizes 5 to 19), misses (CSS Misses' Range Sizes 6 to 20), and women (CSS Women's Range Sizes 10-1/2 to 28-l/2 and 30 to 48). Dimensions for shorter and longer waist lengths are included.

IEC 60317-39:1992 specifies the requirements of glass-fibre braided, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper winding wire, temperature index 180. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock…

Specifies the performance standards and type testing of marine radar transponders used in search and rescue operations at sea (SART), as required by the relevant regulations of the international SOLAS convention. Is associated with IEC 60936 and IEC 60945.

Applies to electromechanical air break contactors for household and similar purposes provided with main contacts intended to be connected to circuits the rated voltage of which does not exceed 440 V a.c. with rated operational currents less than or equal to 63 A for utilization category AC-7a and 32 A for utilization category AC-7b, and rated conditional short-circuit current less than or equal…

This Particular Standard refers to IEC 601-1 and specifies the requirements for safety. The field of application includes, but is not limited to perioperative use, adult critical care application, paediatric and neonatal applications, general determination of saturation on hospitalized and non-hospitalized patients. Annex A gives a rationale.

The two methods described are applicable to all known types of thermoplastics and cross-linked thermoplastics pipes at any temperature and to any practicable test medium. They were developed on the basis of test data from pipes of relatively small sizes. The pipe sizes to be tested are specified in the relevant product standard.

Describes the classes 0 to 3 of the OSI transport protocol, defined in ISO 8073 using the formal description technique LOTOS, which is defined in ISO 8807. Transport protocol class 4 and NMCS are not covered. In view of complexity and widespread use of OSI standards it is imperative to have precise and unambiguous definitions of these standards. Formal Description Techniques form an effective…

Specifies general rules for appropriate implementation of radiographic inspection and stresses the technical specifications to be defined for agreement on discontinuity acceptance criteria by this technique. Annex A gives an extract of ASTM Standard E 155-85 "Standard reference radiographs for inspection of aluminium and magnesium castings" (slightly modified), Annex B grades of…

Describes the classes 0 to 3 of the OSI transport protocol, defined in ISO 8073 using the formal description technique LOTOS, which is defined in ISO 8807. Transport protocol class 4 and NMCS are not covered. In view of complexity and widespread use of OSI standards it is imperative to have precise and unambiguous definitions of these standards. Formal Description Techniques form an effective…

IEC 60317-40:1992 specifies the requirements of glass-fibre braided, silicone varnish treated, bare or enamelled rectangular copper winding wire, temperature index 200. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot…