Search

1 Scope This document defines the construction, safety, and performance requirements of modular or factorymatched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen. This document is applicable to hydrogen generators that use the following types of ion transport medium: — group of aqueous…

1 Scope 1.1 Inclusions This Standard applies to fuel gas piping systems using corrugated stainless steel tubing (CSST), intended for installation in residential, commercial, or industrial buildings, and including the following components as a minimum: a) corrugated stainless steel tubing (CSST) piping systems not exceeding a size of 2 in (50.8 mm), based on the nominal inside diameter of the…

1 Scope 1.1 This Standard specifies requirements for photovoltaic (PV) rapid shutdown systems (PVRSS) and PV rapid shutdown equipment (PVRSE) intended to be used in locations in accordance with CSA C22.1, Canadian Electrical Code, Part I (CE Code, Part I) and rated 1500 V or less. A PVRSS is an integrated set of discrete PVRSE that work together to shut down one or more PV arrays installed on a…

Scope Replacement: This part of the 80601 International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ELECTROENCEPHALOGRAPHS as defined in 201.3.204, hereafter also referred to as ME EQUIPMENT or ME SYSTEM. This document is applicable to ELECTROENCEPHALOGRAPHS intended for use in professional healthcare facilities, the EMERGENCY MEDICAL SERVICES ENVIRONMENT or the HOME…

Scope Replacement: This part of IEC 80601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE OF DENTAL UNITS, DENTAL PATIENT CHAIRS, DENTAL HANDPIECES AND DENTAL OPERATING LIGHTS, hereafter referred to as DENTAL EQUIPMENT. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric dishwashers for household and similar purposes that are intended for washing and rinsing dishes, cutlery and other utensils, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances intended for normal household…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of microwave ovens for household and similar use, their rated voltage being not more than 250 V. This standard also deals with combination microwave ovens, for which Annex AA is applicable. This standard also deals with microwave ovens intended to be used on board ships, for which Annex…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of electric clothes dryers for drying textiles on racks located in a warm airflow, clothes dryers intended for drying footwear or gloves and to electric towel rails, for household and similar purposes, their rated voltage being not more than 250 V. NOTE 101 The clothes racks can be fixed…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric stationary circulation pumps for household and similar purposes intended for use in heating systems or in service water systems, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 The hydraulic and…

1 Scope 1.1 General This Standard is intended to form the basis of a QMS within a health care or home setting for the purpose of providing safe, reliable kidney dialysis treatments. Note: A comprehensive QMS can be achieved when this Standard is used in combination with the following related Standards: a) CAN/CSA-C22.2 No. 60601-1; b) CAN/CSA-C22.2 No. 60601-2-16; c) CAN/CSA-C22.2 No.…