Guideline for Seismic Risk Reduction of Operational and Functional Components (OFCs) of Buildings
1. Scope
1.1 General
This Guideline provides information and methodology to identify and evaluate hazards caused by earthquake forces acting on operational and functional components (OFCs) and to undertake appropriate mitigation strategies and techniques. It is important to note that seismic risk reduction of OFCs is affected by the structural performance of the building, although the…
Road vehicles — Air filters for passenger compartments — Part 1: Test for particulate filtration
This part of ISO/TS 11155 specifies a particulate filtration test, including the critical characteristics of equipment,
test procedure and report format, for the consistent assessment of filter elements in a laboratory test rig with
particle sizes larger than 0,3 μm. It is applicable to filters for removing particulate matter from external or
recirculated air used for ventilating motor vehicle…
Handling of Waste Materials in Health Care Facilities and Veterinary Health Care Facilities
1. Scope
Note: In many guidelines, all waste contaminated with blood or body fluids is classified as biomedical waste. This enormously increases the volume of waste requiring expensive handling and disposal. Identical items of waste are disposed of from homes with no special handling or decontamination.
The identification of every client who carries a blood borne pathogen including, but…
This International Standard specifies the framework, concepts and methodology for testing and criteria to be
achieved to claim conformance to the family of ISO geographic information standards. It provides a framework for
specifying abstract test suites (ATS) and for defining the procedures to be followed during conformance testing.
Conformance may be claimed for data or software products or…
Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 1:...
This part of ISO/TS 10811 defines methods of measurement, algorithms for analysis and the report of shock and
vibration data for equipment in buildings which is sensitive to shock and vibration. The methods are applicable to
the quantification of a future installation or the verification of an existing one.
Accurate vibration data acquisition, analysis and uniform reporting methods are needed to…
Petroleum products and lubricants — Determination of water washout characteristics of lubricating gr...
This International Standard specifies a method for evaluating the resistance of a lubricating grease to washout by
water from a bearing, when tested at 38 °C and 79 °C under specified laboratory conditions.
It is not to be considered the equivalent of service evaluation tests.
Model Code for the Field Evaluation of Electrical Equipment
1. Scope
1.1 This Model Code provides construction, marking, and test requirements for
the field evaluation of electrical/electronic equipment on behalf of
participating provinces and territories by a certification organization or an
inspection agency recognized by the regulatory authority.
1.2 This Model Code applies, but is not limited, to the following:
(a) custom-built equipment…
1. SCOPe
1.1 This Standard covers requirements for control units, fire alarm systems
and control unit accessories for use in accordance with the Standard for the
Installation of Fire Alarm Systems, CAN/ULC-S524, in accordance with Rule
32-004(1) of the Canadian Electrical Code, Part I, and the National Building
Code of Canada.
1.2 If a fire alarm system incorporates the features and…
1. Scope
1.1
This Standard provides requirements for polyolefin laboratory drainage systems from corrosive applications. Requirements for materials, pipe, and fittings
are included.
Note: Polyolefin includes both polyethylene and polypropylene plastics.
1.2
These requirements apply to pipe and fittings that are to be joined by heat fusion using the joining equipment supplied by the…
