Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) -Part 2: Guidance on Tas...
This National Standard of Canada is equivalent to International Standard ISO
9241-2:1992.
1 Scope
This part of ISO 9241 provides guidelines to users of VDT-based information
processing systems with reference to office tasks. This guidance is relevant
to both the organization implementing the system and the people using the
equipment. The guidance should be applied in accordance with…
Energy Efficiency of Oil-Fired Storage Tank Water Heaters
1. Scope
1.1
This Standard specifies the method for determining the energy factor for oil-fired storage tank water heaters.
1.2
This Standard establishes minimum energy efficiency levels for oil-fired storage tank water heaters.
1.3
This Standard applies to oil-fired storage tank water heaters with an input rating of 107 000 kJ/hr or 30.5 kW (0.75 USGPH) or less and a manufacturer's…
Energy Efficiency of Electric Storage Tank Water Heaters and Heat Pump Water Heaters
1. Scope
1.1
This Standard specifies the methods for determining the energy factor for electric storage tank water heaters and heat pump water heaters.
1.2
This Standard establishes minimum energy efficiency levels for electric storage tank water heaters and heat pump water heaters.
1.3
This Standard applies to
(a) electric storage tank water heaters
(i) with volumes of 76…
Information to Assist Forestry Organizations in the Use of Environmental Management System Standards...
This National Standard of Canada is equivalent to International Standard ISO/TR 14061:1998 (first edition, 1998-12-15).
1. Scope
This Technical Report is designed to be used in conjunction with ISO 14001 and ISO 14004. It provides a link between the management system approach of ISO 14001 and the range of forest policy and forest management performance objectives, including SFM principles and…
1. Scope
1.1
This Standard specifies
(a) the chassis and body requirements, and
(b) the required safety equipment for school buses.
1.2
This Standard applies to Types A1, A2, B, C, and D school buses.
1.3
This Standard does not cover after-market and retrofit installations. These installations are covered by federal and provincial regulations, and it is the responsibility of the…
Installation Code for Propane Fuel Systems and Tanks on Highway Vehicles
1. Scope
1.1
This Code applies to the installation of propane fuel system components and
tanks on highway vehicles for the provision of motive power except when a motor
vehicle is manufactured with a propane fuel system that meets the requirements
of Government of Canada Motor Vehicle Safety Standard 301.
1.2
Where the term "propane" is used, the requirements of this Code…
Energy Efficiency Test Methods for Three-Phase Induction Motors
1. Scope
1.1
This Standard specifies the test methods to be used in measuring the energy efficiency of three-phase induction motors, in support of a consumer/user information program.
The method of determining and marking the nominal efficiency values is also specified.
Note: The test methods contained in this Standard are not limited to specific types of motors, but where this…
Uses of reaction to fire test results — Part 2: Fire hazard assessment of construction products
This part of ISO/TR 11696 provides guidance on the principles and use of fire test data and other relevant
information concerning construction products and their end-use environment, so that potential fire hazards and/or
risks may be assessed. It suggests procedures for expressing results and how to interpret the data to aid the fire
hazard assessment process. The guidance given is aimed at…
1. Scope
1.1 Purpose
The purpose of this Code is to provide minimum requirements for the design,
construction, installation, and maintenance of those mechanical refrigeration
systems included in Clause 1.2, so as to minimize the risk of human injury.
Note: This Code does not directly address protection of property and
preservation of the environment, which may be addressed in other Acts…
Packaging of Infectious Substances, Diagnostic Specimens, Biological Products and Biomedical Waste f...
1. SCOPE
1.1 This standard contains requirements for the design, manufacturing and
marking for three types of means of containment used for the transportation of
Class 6.2 dangerous goods (infectious substances), diagnostic specimens,
biological products and biomedical waste.
- Type 1A (high integrity)
- Type 1B (routine)
- Type 1C (waste).
1.2 This…