Search

1 Scope This document identifies a collection of user accessibility needs that diverse users have of ICT systems to make these systems accessible to them. Each user accessibility need might be required of a system by an individual. Different users can have different sets of user accessibility needs in different contexts. While this set of user accessibility needs was developed for the domain of…

1 Scope 1.1 General This Standard specifies performance requirements for thermostats (120 to 240 V) intended for switching of a controlled resistive heating load. The models covered by this Standard are as follows: a) wall-mounted thermostats used with baseboards, panel convectors, or radiant floors; b) built-in thermostats (1000 W up to 1500 W) used in baseboards or panel convectors;…

1.1 These requirements cover discrete electrical control units, communication units, transport products which manipulate the data packets, interfaces, and accessories for mass notification systems. 1.2 The products covered by this Standard are intended to be used in combination with other appliances and devices to form an emergency communication and/or mass notification system. These products…

1 Scope 1.1 This Standard applies to unvented portable type gas camp heaters of the catalytic and infrared type only up to and including a maximum input of 12,000 Btu/hr (3 517 w) using propane, butane, and liquefied petroleum gas mixtures thereof, and intended for outdoor use. 1.2 This Standard applies to portable type gas camp heaters having a: a) regulated pressure; or b) non-regulated…

This document specifies the design requirements, selection and application of exterior insulation and finish systems (EIFS) for use by building designers, building code officials, product manufacturers and contractors in order to sustain the installed performance and durability of EIFS. NOTE This document does not address all aspects related to EIFS design, selection and use. A working…

This document focuses on remote maintenance services (RMS) for information systems in healthcare facilities (HCFs) as provided by vendors of medical devices and health information systems. This document specifies the risk assessment necessary to protect remote maintenance activities, taking into consideration the special characteristics of the healthcare field such as patient safety, regulations…

This document gives minimum safety, ergonomic, and performance requirements for Camera Monitor Systems to replace mandatory inside and outside rearview mirrors for road vehicles (e.g. classes I to IV as defined in UN Regulation No. 46). It addresses Camera Monitor Systems (CMS) that will be used in road vehicles to present the required outside information of a specific field of view inside the…

This document prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation. The shape and colour of each safety sign are according to ISO 3864‑1 and the design of the graphical symbols is according to ISO 3864‑3. This document is applicable to all locations where safety issues related to people need to be addressed. However,…

IEC 61097-6:2005+A1:2011+A2:2019 Specifies the minimum performance requirements, technical characteristics and type-testing requirements for narrowband telegraph equipment for the reception of navigational and meteorological information as required by the International Convention for Safety of Life at Sea (SOLAS), and which is associated with IEC 60945. Also incorporates the performance standards…

1 Scope 1.1 This Standard applies to individual gas appliance pressure regulators, which are not a part of a combination control (see Clause 3, Definitions), constructed entirely of new, unused parts and materials, hereinafter referred to as regulators, intended for application on individual gas appliances. This Standard also applies to negative gas appliance pressure regulators (see Clause 3…