Search

1 Domaine d’application 1.1 Cette norme énonce les exigences relatives à la performance, à la conception, à la mise à l’essai, au marquage, à la classification et autres exigences relatives aux connecteurs d’ancrage utilisés dans les systèmes de limitation du déplacement, d’arrêt de chute, de maintien en position de travail et de composants suspendus/lignes de tirants. 1.2 Les exigences de…

1 Scope 1.1 General This Standard contains best practice guidance for the design and construction of low-rise, wood-frame buildings to withstand high winds corresponding to EF-2 tornado-level wind speeds, assumed to be associated with a reference velocity pressure of 1 kPa. The guidance in this Standard is based on, and written to, supplement the requirements specified in Part 9 of the National…

1 Scope 1.1 Object This Standard provides Canadian monitoring network operator requirements and recommendations for selecting sites for automated, surface-based, hydrometeorological monitoring stations, and broad guidance for installing and maintaining commonly used automated hydrometeorological instrumentation. This Standard has two main technical sections: a) Clause 4, on station…

1 Domaine d’application 1.1 Objet Cette norme présente les exigences et les recommandations de l’exploitant de réseaux canadiens de surveillance pour la sélection de sites pour les stations terrestres de surveillance hydrométéorologique automatisées, ainsi que des directives générales pour l’installation et l’entretien d’instruments hydrométéorologiques automatisés couramment utilisés. La…

1 Domaine d’application 1.1 Généralités Cette norme contient les meilleures pratiques recommandées pour la conception et la construction de bâtiments de faible hauteur à ossature de bois pour résister à des vents forts correspondant à la vitesse du vent d’une tornade EF-2, supposée être associée à une pression de vitesse de référence de 1 kPa. Les lignes directrices dans cette norme sont…

1 Scope 1.1 Applicable equipment This Standard applies to newly produced outdoor cooking gas appliances (see Clause 3) constructed entirely of new, unused parts and materials. Outdoor cooking gas appliances submitted for examination under this Standard are classified as portable, stationary, or built-in. 1.2 Applicable equipment for recreational vehicle This Standard applies to outdoor…

1 Scope 1.1 This Standard covers polymeric subsurface stormwater management structures and accessories used in the collection, detention, retention, and infiltration of stormwater runoff. Applications include, but are not limited to, commercial, municipal, residential, agricultural, industrial, recreational, and highway drainage. Note: In the CSA B184 Series, polymeric subsurface stormwater…

This document specifies a uniform representation of human sexes for the interchange of information. It is intended to: —    reduce the time required to record and/or format the representation of sexes and transmit the corresponding data; —    improve clarity and accuracy of interchange; —    minimize the amount of human intervention required for communicating the representation of sexes; and…

This document specifies a method for the determination of fuel consumption and resulting CO2 emissions to enable fleet managers to reduce fuel costs and greenhouse gas (GHG) emissions in a sustainable manner. The fuel consumption determination is achieved by extracting trip data and speed profiles from the global navigation satellite system (GNSS) receiver of a nomadic device (ND), by sending it…

IEC 62271-204:2022 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 62271-204:2022 applies to rigid HV gas‑insulated transmission lines (GIL) in which the insulation is obtained,…