Search

Scope 1.1 This Standard applies to solid-state lighting controls rated at 600 V and less, with or without an integral switching (disconnecting) device, designed to be used in circuits (a) for the control of incandescent lamps; and (b) for the control of fluorescent, HID, ballasted, and similar lamps intended for installation in accordance with the Rules of the Canadian Electrical Code, Part I…

Scope 1.1 This Standard specifies the methods to be used for measuring the energy consumption and drum volume of household electric tumble-type clothes dryers and for evaluating their energy performance. This Standard also describes methods for determining energy consumption, with associated energy factors, and specifies maximum energy consumption limits. 1.2 This Standard applies to…

Scope 1.1 This Standard specifies precautionary and remedial measures, including quality system requirements, for preventing exposure to agents released or augmented because of actions undertaken during health care facility construction, renovation, maintenance, and repair work. 1.2 This Standard is intended to apply to the activities of the following individuals or groups in relation to any…

Scope 1.1 This Standard establishes quality requirements for sample collection, transport, and storage to ensure that patient safety and quality of care are at the forefront of the pre-examination process of laboratory testing. 1.2 Specific procedures for each step of the pre-examination process of laboratory testing are beyond the scope of this Standard and should be performed in…

ISO/IEC 29173-1:2012 defines an interface protocol between a device driver of a mobile AIDC application platform and a mobile RFID interrogator within a mobile AIDC terminal. It is intended that ISO/IEC 29173-1:2012 be implemented in both the device driver of a mobile AIDC application platform and the mobile RFID interrogator. Without this standard protocol, manufacturers of mobile RFID…

ISO/IEC 29173-1:2012 defines an interface protocol between a device driver of a mobile AIDC application platform and a mobile RFID interrogator within a mobile AIDC terminal. It is intended that ISO/IEC 29173-1:2012 be implemented in both the device driver of a mobile AIDC application platform and the mobile RFID interrogator. Without this standard protocol, manufacturers of mobile RFID…

IEC 61249-2-27:2012 gives requirements for properties of bismaleimide/triazine modified with non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad in thicknesses of 0,03 mm up to 1,60 mm. The flammability rating is achieved through the use of non-halogenated inorganic and/or organic compounds acting as fire retardants. These…

IEC 61249-2-30:2012 gives requirements for properties of non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad in thicknesses of 0,03 mm up to 1,60 mm. The flammability rating is achieved through the use of non-halogenated inorganic and/or organic compounds acting as fire retardants. These fire retardants are contained as…

IEC 61249-2-39:2012 specifies requirements for properties of modified brominated epoxide woven E-glass laminated sheet of a thickness 0,05 mm up to 3,2 mm, of defined flammability (vertical burning test), copper-clad. The glass transition temperature is defined to be 170 °C minimum.

IEC 61249-2-40:2012 specifies requirements for properties of modified non-halogenated epoxide woven E-glass laminated sheet of a thickness of 0,05 mm up to 3,2 mm, of defined flammability (vertical burning test), copper-clad. The glass transition temperature is defined to be 170 °C minimum.