Search

IEC/TS 62492-2:2013(E) applies to radiation thermometry and addresses all technical data specified in IEC/TS 62492-1. It defines standard test methods which can be used by the end user of radiation thermometers to determine or confirm the fundamental metrological data of radiation thermometers with one wavelength range and one measurement field. It facilitates comparability and testability.…

IEC 60749-26:2013 establishes the procedure for testing, evaluating, and classifying components and microcircuits according to their susceptibility (sensitivity) to damage or degradation by exposure to a defined human body model (HBM) electrostatic discharge (ESD). The purpose (objective) of this standard is to establish a test method that will replicate HBM failures and provide reliable,…

IEC 61643-312:2013 is applicable to gas discharge tubes (GDT) used for overvoltage protection in telecommunications, signalling and low-voltage power distribution networks with nominal system voltages up to 1 000 V (r.m.s.) a.c. and 1 500 V d.c. They are defined as a gap, or several gaps with two or three metal electrodes hermetically sealed so that gas mixture and pressure are under control.…

ISO 9787:2013 defines and specifies robot coordinate systems. It also provides nomenclature, including notations, for the basic robot motions. It is intended to aid in robot alignment, testing, and programming. ISO 9787:2013 applies to all robots and robotic devices as defined in ISO 8373.

ISO 16165:2013 contains terms and definitions relating to oil spills and their control. It provides standardized terminology relating to oil spill response, defined as the broad range of activities related to spill cleanup, including surveillance and assessment, containment, recovery, dispersant use, in situ burning, shoreline cleanup and disposal.

ISO 3534-3:2013 defines the terms used in the field of design of experiments and may be used in the drafting of other International Standards. More specifically, it defines terms used in the field of design of experiments for which the response variable is one-dimensional and continuous and for which the expectation of the response variable is linear in the parameters. The terms with regard to…

ISO 27850:2013 sets forth the test procedures and performance requirements for a falling-object protective structure, in the event such a structure is installed on an agricultural or forestry tractor ISO 27850:2013 is applicable to agricultural and forestry tractors having at least two axles for pneumatic tyred wheels or having tracks instead of wheels. It does not apply to forestry machinery as…

IEC 61557-14:2013 defines special requirements for test and measurement equipment used to determine the electrical safety of electrical equipment of machinery according to IEC 60204-1. IEC 61010 and the existing parts of series IEC 61557 do not cover all safety aspects of testing electrical equipment of machinery. IEC 61557-14 provides additional protection against electric shock for the testing…

IEC 61643-311:2013 is applicable to gas discharge tubes (GDT) used for overvoltage protection in telecommunications, signalling and low-voltage power distribution networks with nominal system voltages up to 1 000 V (r.m.s.) a.c. and 1 500 V d.c..They are defined as a gap, or several gaps with two or three metal electrodes hermetically sealed so that gas mixture and pressure are under control.…

ISO 7130:2013 provides a basis for content and methods used for operator training for earth-moving machinery as defined in ISO 6165. This training in turn provides the basis for developing operators of earth-moving machinery who are knowledgeable and understand the manufacturer's instructions for safe and proper operation and routine maintenance. It establishes criteria for evaluating the…