Space data and information transfer systems — Communications operation procedure-1
ISO 22667:2013 specifies the communications operation procedure-1 (COP-1). This procedure is used with the telecommand (TC) space data link protocol (as defined in ISO 22664:2013) to enable the delivery of service data units to the receiving end of the layer above, correct and without omission or duplication, and in the same sequential order in which they were received from the layer above at the…
Space data and information transfer systems - Asynchronous message service
ISO 17807:2013 defines a CCSDS Asynchronous Message Service (AMS) for mission data system communications. The service and its protocols implement an architectural concept under which the modules of mission systems, distinct sequential flows of application control logic, whether called processes, tasks, or threads, may be designed as if they were to operate in isolation, each one producing and…
Space data and information transfer systems — Flexible advanced coding and modulation scheme for hi...
ISO 17854:2013 defines an efficient and comprehensive coding and modulation solution able to support a wide range of spectral efficiency values and data rates. The main target is given by high data rate telemetry applications, i.e. Earth Exploration Satellite Service (EESS) telemetry payload, where the increase of the system throughput by means of advanced adaptive techniques is deemed essential…
Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair/qua...
IEC 61156-8:2009+A1:2013(E) relates to IEC 61156-1 and IEC 61156-7. The cables described herein are specified up to 1 200 MHz and are specifically designed to build patch, equipment, and work area cables as defined in ISO/IEC 11801 and ISO/IEC 15018. It covers a cable having four individually screened (STP) pairs. The cable may be provided with a common screen over the cable core. The…
Reed switches - Part 1-1: Generic specification - Quality assessment
IEC 62246-1-1:2013 is a quality assessment specification which defines requirements and tests to reed switches for use in general and industrial applications. This standard selects from IEC 62246-1:2011 and from other sources the appropriate test procedures to be used in detail specifications derived from this specification. This standard describes sampling and test schedules for qualification…
Information technology — Generic coding of moving pictures and associated audio information — Part 1...
ISO/IEC 13818-1:2013 specifies the system layer of the coding. It was developed principally to support the combination of the video and audio coding methods defined in ISO/IEC 13818-2 and ISO/IEC 13818-3. The system layer supports six basic functions:
the synchronization of multiple compressed streams on decoding;
the interleaving of multiple compressed streams into a single stream…
Information technology - Generic coding of moving pictures and associated audio information - Part 1...
ISO/IEC 13818-1:2013 specifies the system layer of the coding. It was developed principally to support the combination of the video and audio coding methods defined in ISO/IEC 13818-2 and ISO/IEC 13818-3. The system layer supports six basic functions:
the synchronization of multiple compressed streams on decoding;
the interleaving of multiple compressed streams into a single stream…
Surge arresters - Part 5: Selection and application recommendations
IEC 60099-5:2013 is not a mandatory standard but provides information, guidance, and recommendations for the selection and application of surge arresters to be used in three-phase systems with nominal voltages above 1 kV. It applies to gapless metal-oxide surge arresters as defined in IEC 60099-4, to surge arresters containing both series and parallel gapped structure - rated 52 kV and less as…
Surge arresters - Part 5: Selection and application recommendations
IEC 60099-5:2013 is not a mandatory standard but provides information, guidance, and recommendations for the selection and application of surge arresters to be used in three-phase systems with nominal voltages above 1 kV. It applies to gapless metal-oxide surge arresters as defined in IEC 60099-4, to surge arresters containing both series and parallel gapped structure - rated 52 kV and less as…
Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose
ISO 11137-2:2013 specifies methods for determining the minimum dose needed to achieve a specified requirement for sterility and methods to substantiate the use of 25 kGy or 15 kGy as the sterilization dose to achieve a sterility assurance level, SAL, of 10−6. ISO 11137-2:2013 also specifies methods of sterilization dose audit used to demonstrate the continued effectiveness of the sterilization…
