Preface
This is the second edition of the CSA C448 Series, Design and installation of earth energy systems. It replaces CSA Group Standards, CAN/CSA-C445-M92, Design and Installation of Earth Energy Heat Pump Systems for Residential and Other Small Buildings, and C447-94, Design and Installation of Earth Energy Heat Pump Systems for Commercial and Institutional Buildings.
Since CAN/CSA-C445 and…
Periodic inspection of CANDU nuclear power plant containment components
Scope
1.1
This Standard specifies requirements for the periodic inspection of containment system components, including containment pressure suppression systems, in CANDU nuclear power plants.
1.2
The inspection requirements specified in this Standard (see Annex B for additional guidance) provide assurance of the structural integrity of metallic and plastic containment system components…
Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and ...
IEC 61034-2:2005+A1:2013 Provides details of the test procedure to be employed for the measurement of the density of smoke emitted from cables burning under defined conditions. It describes the means of preparing and assembling cables for test, the method of burning the cables, and gives recommended requirements for evaluating test results. The principal changes with respect to the previous…
Enterprise-control system integration - Part 2: Object and attributes for enterprise-control system ...
IEC 62264-2:2013 specifies generic interface content exchanged between manufacturing control functions and other enterprise functions. The interface considered is between Level 3 manufacturing systems and Level 4 business systems in the hierarchical model defined in IEC 62264-1. The goal is to reduce the risk, cost, and errors associated with implementing the interface. This second edition…
Information technology — MPEG systems technologies — Part 8: Coding-independent code points
ISO/IEC 23001-8:2013 defines various code points and fields that establish properties of a video or audio stream that are independent of the compression encoding and bit rate. These properties may describe the appropriate interpretation of decoded video or audio data or may, similarly, describe the characteristics of such signals before the signal is compressed by an encoder that is suitable for…
Commercial road vehicles — Coupling equipment between vehicles in multiple vehicle combinations — St...
ISO 18868:2013 defines different multiple-vehicle combinations (vehicle combinations with more than one coupling point) and the formulae to calculate the requirement of performance for the coupling equipment used in those vehicle combinations. Vehicle categories concerned are N2, N3, O3, and O4.
Information technology - MPEG systems technologies - Part 8: Coding-independent code points
ISO/IEC 23001-8:2013 defines various code points and fields that establish properties of a video or audio stream that are independent of the compression encoding and bit rate. These properties may describe the appropriate interpretation of decoded video or audio data or may, similarly, describe the characteristics of such signals before the signal is compressed by an encoder that is suitable for…
Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2005+A1:2013 Provides details of the test apparatus to be used for measuring smoke emission when electric or optical fibre cables are burnt under defined conditions, for example, a few cables burnt horizontally. The light transmittance (lt) under flaming combustion and smouldering conditions can be used as a means of comparing different cables or complying with specific requirements.…
Steel and steel products — General technical delivery requirements
ISO 404:2013 specifies the general technical delivery requirements for all steel products covered by ISO 6929, with the exception of steel castings and powder metallurgical products.
ISO 10474 describes the inspection documents to be used.
Where the delivery requirements agreed upon for the order or specified in the appropriate product or material standard differ from the general technical…
