Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging a...
ISO 13274:2013 specifies the requirements and test methods for compatibility testing of plastics packagings/Intermediate Bulk Containers (IBCs) and composite packagings/IBCs with plastics inners containing liquids. The testing involves storage with the liquid to be transported. For polyethylene-based packaging, testing with a standard liquid as defined in The European Agreement concerning the…
Scope
1.1
This Standard applies to air heaters intended for use on nominal system voltages of 600 V or less and designed to be used in accordance with the Canadian Electrical Code, Part I.
1.2
This Standard applies to permanently connected and cord-connected air heaters for household, commercial, and industrial use in non-hazardous locations.
1.3
The term "air heater"…
Scope
1.1
This Standard describes procedures for determining the occupational noise exposure level of workers (Lex,T) using sampling techniques. Lex,T represents the long-term noise exposure of workers and is calculated from measurements of Leq,t in the workplace.
Notes:
1) Noise exposure has been expressed as % dose in the past. However, the use of Leq,t is recommended, as it is more…
B126 SERIES-13 - Water cisterns
Preface
This is the first edition of the CSA B126 Series of Standards, Water cisterns. It consists of the following Standards:
(a) CSA B126.0, General requirements and methods of testing for water cisterns;
(b) CSA B126.1, Installation of water cisterns;
(c) CSA B126.2, Commissioning and field inspection of water cisterns;
(d) CSA B126.3, Operation and…
Electromagnetic compatibility (EMC) — Part 4-7: Testing and measurement techniques — General guide o...
1 Scope
This part of IEC 61000 is applicable to instrumentation intended for measuring spectral
components in the frequency range up to 9 kHz which are superimposed on the fundamental
of the power supply systems at 50 Hz and 60 Hz. For practical considerations, this standard
distinguishes between harmonics, interharmonics and other components above the harmonic
frequency range, up to 9 kHz.
This…
Electromagnetic compatibility (EMC) — Part 4-12: Testing and measurement techniques — Ring wave immu...
1 Scope and object
This part of IEC 61000 relates to the immunity requirements and test methods for electrical
and electronic equipment, under operational conditions, to non-repetitive damped oscillatory
transients (ring waves) occurring in low-voltage power, control and signal lines supplied by
public and non-public networks.
The object of this basic standard is to establish the immunity…
Mobile elevating work platforms — Operator (driver) training
ISO 18878:2013 provides methods for preparing training materials and administering standardized training to operators (drivers) of mobile elevating work platforms (MEWPs). It is applicable to MEWPs, as defined in ISO 16368, intended to move persons, tools and materials to positions where they can carry out work from the work platform.
Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
IEC 60076-3:2013 specifies the insulation requirements and the corresponding insulation tests with reference to specific windings and their terminals. This International Standard applies to power transformers as defined by IEC 60076-1. It also recommends external clearances in air. It gives details of the applicable dielectric tests and minimum dielectric test levels. Recommended minimum external…
Application integration at electric utilities - System interfaces for distribution management - Part...
IEC 61968-100:2013 specifies an implementation profile for the application of the other parts of IEC 61968 using common integration technologies, including JMS and web services. This International Standard also provides guidance with respect to the use of Enterprise Service Bus (ESB) technologies. This provides a means to derive interoperable implementations of IEC 61968-3 to IEC 61968-9. At the…
