1 Scope
1.1
This Standard applies to the following products rated at 600 V and less, and designed to be used in non- hazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I:
a)
cord reels for general use and special use cord reels intended to be mounted on or in utilization equipment such as appliances, portable luminaires, extension cord set storage winders,…
1.1
This Standard covers HF in design for existing and new NPPs.
Notes:
1)
This Standard applies to new designs or modifications, large and small, temporary and permanent, to internally and externally engineered solutions, and to commercial off-the-shelf (COTS) products.
2)
This Standard may provide guidance for nuclear facilities other than NPPs, using a graded approach.
1.2
This…
1.1.1 Scope of Code
This Code applies to the design, evaluation, and structural rehabilitation design of fixed and movable
highway bridges in Canada. There is no limit on span length, but this Code does not necessarily cover all
aspects of design for every type of long-span bridge. This Code also covers the design of pedestrian
bridges, retaining walls, barriers, and highway accessory…
1.1 General
This Standard specifies requirements for
a) mortar for use in bedding, jointing, and bonding of masonry units; and
b) grout for use in filling core, cell, or cavity space in unit masonry construction.
Notes:
1) The term “unit masonry” refers to masonry construction using clay (shale), calcium silicate (sand-lime), or
concrete masonry units, with individual units not more than 200 mm…
1.1
This Standard specifies dimensional and safety requirements for recreational vehicles. Its purpose is to
specify minimum criteria for providing a degree of protection against loss of life from fire and explosion.
1.2
The CSA Z240 RV Series of Standards does not apply to park model trailers.
Note: Park model trailers are covered by the CAN/CSA-Z241 Series of Standards.
1.3
The values…
Consists of N290.0-11, General requirements for safety systems of nuclear power plants and N290.1-13...
N290.0-11 - General requirements for safety systems of nuclear power plants
Preface
This is the first edition of CSA N290.0, General requirements for safety systems of nuclear power plants. This Standard is one of a series of standards on reactor control systems, safety systems, and instrumentation for nuclear power plants.
Scope
1.1
This Standard covers the design, qualification,…
Performance of highmast luminaires for roadway lighting
Scope
1.1
This Standard specifies photometric performance requirements for highmast luminaires that are used for roadway applications.
1.2
The following light sources are addressed in this Standard:
a) clear HPS lamp;
b) clear metal halide lamp; and
c) LED.
Note: Future editions of this Standard might include other light sources.
1.3
This Standard applies to highmast…
Scope
1.1
This Standard describes the methods for determining the level of depressurization and solutions to mitigate risk arising from depressurization.
1.2
This Standard applies to all existing single-family dwelling units contained in detached, semi-detached, and row houses equipped with an exhaust device, which have
a) a combustion device within the house; or
b) an attached…
Plume scavenging in surgical, diagnostic, therapeutic, and aesthetic settings
Scope
1.1
This Standard applies to systems and equipment used to capture and evacuate plume. It applies to all settings where such systems and equipment are used, including, but not limited to, the following:
a) surgical facilities;
b) dental clinics;
c) medical offices;
d) veterinary facilities;
e) laboratories and other research and testing facilities;
f) cosmetic…
Scope
1.1
This Standard applies to rigid unplasticized poly (vinyl chloride)* boxes and fittings of the following types that are intended to be installed and used with rigid PVC conduit at a maximum working temperature of 75 °C in accordance with the rules of the Canadian Electrical Code, Part I:
a) junction boxes with an interior volume of 1640 mL+ or less that are intended to provide…
