Search

The ISO 21308 series describes a generic system for the exchange of data between truck chassis manufacturers and bodywork manufacturers. It applies to commercial vehicles as defined in ISO 3833, having a maximum gross vehicle mass above 3 500 kg. The process of exchanging the above information can involve chassis manufacturers, chassis importers, chassis dealers, one or more bodywork…

ISO/TR 14786:2014 is intended to provide information and analyses in support of the development of chemical nomenclature for the naming of "nano-objects". "Nano-objects" have been defined in ISO/TS 80004‑1:2010 to mean "materials with one, two, or three external dimensions in the nanoscale", with the nanoscale defined as the "size range from approximately 1 nm…

ISO 22400 defines key performance indicators (KPIs) used in manufacturing operations management. ISO 22400-2:2014 specifies a selected number of KPIs in current practice. The KPIs are presented by means of their formula and corresponding elements, their time behaviour, their unit/dimension and other characteristics. ISO 22400-2:2014 also indicates the user group where the KPIs are used, and the…

1 Scope 1.1 This Standard applies to helmets intended to provide head injury risk reduction for recreational alpine skiers and snowboarders. These helmets can also be worn for other non-motorized recreational snow sport activities. This Standard defines the areas of the head that are to be protected for impact injuries. It covers the basic performance requirements for shock absorption,…

1 Scope 1.1 This test method determines the wind uplift resistance of membrane-roofing systems when subjected to dynamic wind load cycles. The test methods are applicable to a) mechanically attached membrane roofing systems; and b) adhered membrane roofing systems. The roofing system consists of a deck and roofing membrane. It includes components such as vapour barriers or retarders,…

1 Scope 1.1 General This Standard specifies requirements for materials and methods for the manufacture, transportation, and installation of architectural, structural, and specialty precast concrete products. Note: This Standard should be specified for precast concrete elements used in segmental construction. 1.2 Shop drawings This Standard specifies the requirements, in addition to those…

1 Scope 1.1 This Standard applies to portable luminaires, intended for use in dry, damp, and wet locations, and intended to be used in accordance with the Rules of the Canadian Electrical Code, Part I, in nonhazardous locations, on a nominal 120 V system and 15 A or 20 A branch circuits, or on the load side of a Class 2, LED Class 2, or safety extra-low voltage (SELV) circuit. 1.2 This…

1 Scope 1.1 This Standard covers component assembly surge protective devices (SPDs) consisting of two or more Type 5 components, intended for use in Type 1, 2, or 3 SPD applications. 1.2 Type 4 component assemblies are designed for repeated limiting of transient voltage surges as specified in this Standard on 50 or 60 Hz power circuits over 42 V and not exceeding 750 V. 1.3 The surge protective…

1 Scope 1.1 This Standard applies to decorative lighting strings, decorative lighting outfits, pre-lit trees, and accessories, intended for seasonal or commercial use connected to circuits of 120 V nominal or less by means of an attachment plug, and designed to be used in accordance with the rules of the Canadian Electrical Code, Part I, in non-hazardous locations. 1.2 These requirements…

1 Scope and object This part of IEC 61000-4 relates to the immunity requirements and test methods for electrical and electronic equipment, under operational conditions, with regard to: a) repetitive damped oscillatory waves occurring mainly in power, control and signal cables installed in high voltage and medium voltage (HV/MV) substations; b) repetitive damped oscillatory waves occurring…