Search

Scope 1.1 This Standard applies to splitters, having a current rating of 5000 A and less, intended for installation in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I on systems having nominal voltages of 600 V and less. 1.2 General requirements applicable to this Standard are given in CAN/CSA-C22.2 No. 0. 1.3 In this Standard, "shall" is…

This is the second edition of CAN/CSA-C22.2 No. 60601-2-3, Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60601-2-3 (third edition, 2012-04). It supersedes the previous…

Scope 1.1 This Standard covers the test requirements used to measure battery charger energy consumption for battery chargers intended to be operated from 115 V ac, 60 Hz line voltage connected by plug to wall receptacles or existing dc sources (such as automotive power jacks or USB ports). 1.2 This Standard applies to battery-charging systems that are intended to charge secondary battery…

Scope 1.1 This Standard specifies material and fabrication requirements for corrugated steel pipe, spiral rib pipe, structural plate corrugated steel pipe products, and two-flange tunnel liner plate. 1.2 This Standard applies to the use of corrugated steel pipe, spiral rib pipe, and structural plate corrugated steel pipe for applications such as culverts, storm sewers, sanitary sewers,…

Scope 1.1 General This Standard covers seamless pipe, electric-welded pipe (flash-welded pipe and low-frequency electricwelded pipe excluded) and submerged-arc-welded pipe primarily intended for use in oil or gas pipeline systems. Notes: 1) Flash-welded pipe is pipe manufactured by a process using electric-resistance heating to produce a simultaneous coalescence over the entire area…

A231.1-14 - Precast concrete paving slabs Scope 1.1 This Standard specifies requirements for concrete paving slabs manufactured from hydraulic cement concrete to be used in the construction of pavement and roof coverings. This Standard includes units with architectural finishes or tactile surfaces. Note: Annex A contains information on efflorescence and recommends methods for its removal…

Scope 1.1 This Standard describes essential elements and methods in the safe handling, transportation, and biological decontamination of contaminated reusable medical devices and is to be used in conjunction with CSA Z314.0. Where differences exist, the requirements of this Standard apply. Note: The biological decontamination process includes thorough cleaning and, whenever necessary for…

1 Scope 1.1 This Standard applies to factory-manufactured residential, commercial, and industrial packaged terminal air-conditioners and heat pumps as defined in Clause 3. 1.2 This Standard applies to electrically operated vapour-compression refrigeration systems. 1.3 Packaged terminal air-conditioners and heat pumps are intended for unducted installation, but may be employed with ductwork…

1 Scope 1.1 Except as indicated in Clause 1.2, Part 1 of this Standard applies to all boilers, pressure vessels, pressure piping, and fittings, as provided for by the Act (as defined in Clause 3) and identified in Part 1 of this Standard. Notes: (1) It is possible that the size limitations specified in provincial or territorial statutes or regulations will differ from those specified in…

Scope This International Standard specifies an XML protocol for the services defined in ISO/IEC 18051. It provides an alternative protocol to the ASN.1 based protocol specified in ISO/IEC 18052. In addition to the CSTA-specific protocol details, this International Standard describes the concepts underlying the request/response model, application association, notation and service, and describes…