Search

Scope This International Standard applies to Mobile radio frequency identification (RFID) interrogator devices used to inventory passive or semi-passive backscatter tags at 860 MHz to 960 MHz in a mobile (non-fixed) application independent from specific communication details, i.e. modulation technique and command set. Furthermore, the scope of this International Standard is mobile consumer…

Scope This project develops a set of common functionality for the family of IEEE 1451 smart transducer interface standards. This functionality is independent of the physical communications media. It includes the basic functions required to control and manage smart transducers, common communications protocols, and media-independent TEDS formats. It defines a set of implementation-independent APIs…

Scope This Technical Report gives guidelines to deal with the effects of substrate gloss and/or low opacity on the performance of bar code symbols when scanned by reading and verification systems. This Technical Report defines methods of measurement for gloss and opacity; it identifies conditions and values that present a risk of reading problems and provides recommendations to users on the…

Scope This Technical Report defines for each of ISO/IEC 18000-2, -3, -4, -6 and -7, and, where relevant, for each Mode within each part, a transaction that achieves an elementary tag “identification data element” for item identification and management. The transaction uses the existing air interface protocols defined in the corresponding parts of ISO/IEC 18000 or a subset thereof.

Scope 1.1 This Standard describes the requirements, including quality system requirements, for the O&M of an HCF. It sets out specific requirements for a) buildings and architectural systems; b) site elements related to the building and its functions, including on-site access routes; c) on-site utilities; d) the building's mechanical, electrical, and information…

Scope 1.1 This Standard provides basic procedures based on joint ultimate load or a limiting slip for the determination of the lateral strength resistance and lateral slip resistance of truss plate teeth embedded in sawn and structural composite lumber members. 1.2 This Standard provides for the determination of the lateral strength resistance and lateral slip resistance of nails embedded…

Scope 1.1 This Standard applies to the selection of materials for, and the fabrication and installation of, preserved wood foundations. 1.2 Specific details are provided for buildings up to three storeys in building height above the foundation and having a building area not exceeding 600 m2. 1.3 This Standard provides for the optional use of wood sleeper, poured concrete slab, and suspended…

Scope 1.1 This Standard applies to single- and multi-conductor Type TECK 90 armoured cable intended for installation in accordance with the Canadian Electrical Code, Part I, on systems having nominal voltages of 5000 V and less and having a maximum temperature rating of 90 °C in both dry and wet locations. 1.2 In this Standard, "shall" is used to express a requirement, i.e., a…

Scope 1.1 This Standard applies to photovoltaic connectors: a) single pole, rated maximum 2000 V dc; and b) multi-pole, rated maximum 2000 V ac or dc. 1.2 This Standard applies to photovoltaic connectors intended for use in solar photovoltaic systems in accordance with the Canadian Electrical Code, Part I, using stranded copper conductors, for use in either indoor or outdoor nonhazardous…

Scope 1.1 This Standard applies to deadfront indoor enclosed and outdoor enclosed assemblies of switchgear devices such as a) switches; b) interrupting devices; c) air circuit breakers; d) power circuit breakers; and e) control, metering, protective, and regulating equipment with associated interconnections and supporting structures. 1.2 This Standard covers equipment with a nominal…