Search

ISO/IEC/IEEE 8802-3:2014 specifies Ethernet local area network operation for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed…

ISO/IEC/IEEE 8802-3:2014 specifies Ethernet local area network operation for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed…

16311-3:2014 defines basic considerations and decision-making for the specification of repair and prevention remedies, and management strategies for reinforced and unreinforced concrete structures using products and systems specified in other International Standards or Technical Specifications. 16311-3:2014 covers only atmospherically exposed structures, and buried or submerged structures, if…

IEC 60050-651:2014 defines terms specifically relevant to live working for inclusion in the International Electrotechnical Vocabulary (IEV). The aim of IEC 60050-651:2014 is to provide precise, brief and correct definitions of internationally accepted concepts in the field of live working, and to name the terms by which these defined concepts shall be known. This terminology is consistent with…

ISO/TS 17419:2014 illustrates and specifies "Global Classification and Management of ITS Applications" (GCMA). It is based on the ITS station and communication architecture described in ISO 21217. It describes and specifies globally unique addresses and identifiers (ITS-S object identifiers) which are both internal and external to ITS stations and are used for ITS station management,…

C873.0-14 - Building energy estimation methodology - Part 0 - Definitions and general requirements for the calculation of energy loads, energy consumption, and source energy for heating, cooling, ventilation, domestic hot water, and lighting in buildings Scope 1.1 This Standard specifies general requirements such as reference publications, definitions, abbreviations, symbols, and subscripts…

Scope 1.1 General 1.1.1 This Standard applies to unitary air conditioners and heat pumps that are a) factory-made; b) air-source and/or air-sink; c) split-system matching assemblies (including mini-split and multi-split) or single package; d) of the type classified in Clause 1.2; e) intended for air-conditioning and space-heating applications in buildings; f) electrically driven,…

Scope 1.1 This Standard establishes requirements for newly produced compressed natural gas fuel system components, intended for use on natural gas powered vehicles, as listed in Table 1, below: Table 1 - Fuel system components - (See Clauses 1.1 and 1.5.) Check valve Manual valve Manual container valve Automatic valve Gas injector Pressure indicator Pressure regulator Gas flow…

ISO/TS 16095:2014 defines - the physical and chemical tests on raw reclaimed natural rubber, and - the standard materials, standard test formulations, equipment, and processing methods for evaluating the vulcanization characteristics, and the mechanical properties of reclaimed natural rubber.

ISO 15118-2:2014 specifies the communication between battery electric vehicles (BEV) or plug-in hybrid electric vehicles (PHEV) and the Electric Vehicle Supply Equipment. The application layer message set defined in ISO 15118-2:2014 is designed to support the energy transfer from an EVSE to an EV. ISO 15118-1 contains additional use case elements describing the bidirectional energy transfer. The…