Search

ISO 24156-1:2014 gives guidelines for using a subset of UML symbols independent of their normal UML meaning, to represent concepts in concept models that result from concept analysis. It describes how UML symbols can be used for that. A UML profile designed for this purpose is used to represent concepts and concept relations in terminology work. ISO 24156-1:2014 does not describe UML and its…

ISO/IEC 10373-5:2014 defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross‑referenced to one or more base standards, which can be ISO/IEC 7810 or one or more of the supplementary standards that define the information storage technologies employed in identification cards applications. NOTE 1 Criteria for…

1 Scope 1.1 This Standard describes zinc-coated steel wire strand suitable for use as guys, suspension strand, span wires, and overhead ground wire strand. Overhead ground wire strand for electric power transmission is produced free of wire joints. Included are requirements for Grades 800, 1100, 1300, and 1500 (110, 160, 180, and 220). Zinc coatings for all grades include hot-dip Class A and…

1 Scope 1.1 This Standard applies to portable type gas water heaters (herein after referred to as appliance or water heater) for use with propane, butane, or liquefied petroleum gases and mixtures thereof having: a) a regulated pressure; b) a non-regulated pressure. 1.2 Portable type water heaters and components employing materials or having forms of construction differing from those…

1 Scope 1.1 This Standard covers the qualification, application, inspection, testing, handling, and storage of materials required for plant-applied fusion bond epoxy (FBE) coating applied externally to bare steel pipe. The coated pipe is intended primarily for buried or submerged service for oil or gas pipeline systems. 1.2 This Standard covers the following coating systems: (a) System 1A…

1 Scope 1.1 This Standard covers the qualification, application, inspection, testing, handling, and storage of materials required for coatings applied externally to steel piping in the field or a shop. Coated piping addressed by this Standard is intended primarily for buried or submerged service in oil or gas pipeline systems. 1.2 This Standard covers the following coating systems: a)…

1 SCOPE 1.1 This method of test for flammability characteristics is applicable to certain low density insulating materials that do not melt or drip during exposure to fire (see Appendix A). It is used in establishing the Flame Spread Classification for those foamed plastics whose flammability assessment found in CAN/ULC-S102, Standard Method of Test for Surface Burning Characteristics of…

Scope 1.1 General This Standard specifies requirements for the identification of OHS hazards, their elimination where practical, and assessment and control of risks associated with remaining hazards. 1.2 Applicability This Standard is applicable to organizations of any size or type and can be applied at all stages in the lifecycle of a product, process, or service. 1.3 Use This Standard is…

ISO 6358-3:2014 specifies a method that uses a simple numerical technique to estimate without measurements the overall flow-rate characteristics of a system of components and piping with known flow-rate characteristics. The formulae used in ISO 6358-3:2014 describe the behaviour of a compressible fluid flow through a component for both subsonic and choked flows. ISO 6358-3:2014 also provides…

ISO 22400 specifies an industry-neutral framework for defining, composing, exchanging, and using key performance indicators (KPIs) for manufacturing operations management (MOM), as defined in IEC 62264‑1 for batch, continuous and discrete industries. ISO 22400-1:2014: provides an overview of what a KPI is, presents concepts of relevance for working with KPIs including criteria for constructing…