Search

IEC 61786-2:2014 provides requirements for the measurement of quasi-static magnetic and electric fields that have a frequency content in the range 1 Hz to 100 kHz, and DC magnetic fields, to evaluate the exposure levels of the human body to these fields. Specifically, this standard gives requirements for establishing measurement procedures that achieve defined goals pertaining to human exposure.…

ISO 15845:2014 specifies the minimum functional and safety requirements for enclosed self-propelled boarding vehicles designed for transporting and boarding/de-boarding persons with reduced mobility onto/from the main deck or upper deck of main line civil transport aircraft on which they are travelling as a passenger. The intent of ISO 15845:2014 is not to specify equipment design, but rather to…

ISO 24338:2014 specifies two methods (A and B) for measuring abrasion of laminate floor covering elements. The tests described measure the ability of the surface layer to resist abrasive wear-through. Abrasion, according to method A, is achieved by rotating a test specimen in contact with a pair of loaded cylindrical wheels covered with specified abrasive paper. The resistance to wear, according…

ISO/IEC 24775-6:2014(E) defines management profiles for Autonomous (top level) profiles for programs and devices whose central function is providing support for storage networking. This standard includes four autonomous profiles: Fabric, Switch, Extender and iSCSI to FC Gateway. This International Standard, together with ISO/IEC 24775-1 to ISO/IEC 24775-5 and ISO/IEC 24775-7 and ISO/IEC 24775-8,…

ISO/IEC 24775-7:2014(E) defines management profiles for autonomous, component and abstract profiles for management of host-based storage devices. The autonomous profiles describe the management of a stand-alone host-based storage entity. The component profiles (or subprofiles) describe management of aspects of host-based storage entities that may be used by other autonomous profiles. Finally,…

ISO 8039:2014 specifies a series of values, tolerances, and symbols for the magnification of imaging components of light microscopes and defines a number of imaging components and magnifying systems to which they apply.

ISO 16119-4:2014 specifies requirements and the means for their verification for the design and performance of fixed and semi-mobile sprayers, as defined in 3.1 and 3.2, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. This type of spraying system is generally a combination of separate elements (main tank,…

1 Scope 1.1 Mitigation techniques and other actions This Standard covers the following mitigation techniques to maintain permafrost or remediate permafrost degradation around existing buildings or structures: a) site techniques that consist of i) shading; ii) drainage and grading; and iii) ground cover and snow management; b) foundation techniques that consist of i) ventilation; ii)…

1 Scope 1.1 This Standard specifies the dimensional and material requirements for facially featured headforms to be used in the testing of full-face protection and eye protection equipment, especially impact protection testing. 1.2 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is…

1 Scope 1.1 This Standard deals with over-the-shoe toe protectors for temporary use and includes requirements for one grade of toe impact resistance. Note: This type of protector should not be confused with fully-integrated safety footwear (as specified in CSA Z195). 1.2 This Standard also provides requirements for slip-resisting over-the-shoe toe protectors. 1.3 For the purpose of this…