Search

ISO 8267-1:2015 specifies the interface requirements for tow bar attachment fittings on the nose gear (when towing operations are performed from the nose gear) in conventional tricycle type landing gears of commercial civil transport passenger and freight aircraft. Its purpose is to achieve tow bar attachment fittings interface standardization by aircraft mass category (which determines tow bar…

IEC 60691:2015 is applicable to thermal-links intended for incorporation in electrical appliances, electronic equipment and component parts thereof, normally intended for use indoors, in order to protect them against excessive temperatures under abnormal conditions. This standard may be applicable to thermal-links for use under conditions other than indoors, provided that the climatic and other…

Common payment scheme for multi-modal transport services, such as toll roads and public transport, are implemented all over the world. These systems are often based on a common payment medium, e.g. IC cards, for use in more than one transport service. The aim of ISO/TR 19639:2015 is to analyse the existing set of EFC standards for their suitability for using common payment media for multi-modal…

IEC 62642-2-71:2015 defines passive acoustic glass break detectors installed in buildings and provides for security grades 1 to 4 (see IEC 62642-1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see IEC 62599-1).

IEC 62642-2-72:2015 defines passive surface mounted glass break detectors installed in buildings and provides for security grades 1 to 4 (see IEC 62642-1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see IEC 62599-1).

IEC 62642-2-73:2015 defines active surface mounted glass break detectors installed in buildings and provides for security grades 1 to 4 (see IEC 62642-1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see IEC 62599-1).

1.1 This Standard outlines procedures for the certification of treatment plants and the identification of certified lumber and plywood for use in permanent wood foundations (PWF). 1.2 This Standard does not transfer any responsibility for the quality of the treated product from the manufacturer to the certification agency. 1.3 This Standard does not cover the grading of lumber or plywood…

1.1 This Standard applies to insulated conductors intended for internal wiring of electrical equipment, for leads of transformers, motors, etc., and for luminous-tube signs and ignition systems, to be installed in accordance with the Canadian Electrical Code, Part I. 1.2 Constructions to which this Standard applies are shown in Tables 1 and 2. The Tables are not a complete summary of the…

1.1 This Standard applies to factory-made automatic icemakers with a capacity not exceeding 1814 kg/24 h, measured at standard rating conditions. These machines produce cube, flake, crushed, nugget, or fragmented ice in batches or in a continuous process. They are electrically operated and are designed for a 60 Hz operating current with nominal nameplate voltage. 1.2 This Standard applies to…

1.1 This Standard specifies requirements for copper and aluminum conductor secondary and serviceentrance cables intended for use on systems having a nominal voltage of 600 V or less in underground installation a) by direct burial; or b) in duct systems. This Standard also applies to multiple-conductor cable assemblies. The products specified in this Standard are designed to be installed in…