Search

ISO 12641-1:2016 defines the layout and colorimetric values of targets for use in the calibration of a photographic product/input scanner combination (as used in the preparatory process for printing and publishing). One target is defined for positive colour transparency film and another is defined for colour photographic paper.

ISO 17972-2:2016 defines an exchange format for target input values, colour and process control data relating to scanner targets (and the associated metadata necessary for its proper interpretation) in electronic form. This part of ISO 17972 includes the use of a CustomResource element within the CxF framework to define a minimum set of data for exchange and identify the data as being part of ISO…

1.1 This Standard specifies the chassis and body requirements and safety equipment requirements for school buses. It is a manufacturing standard intended to apply to original equipment supplied by the bus manufacturer. Note: The main purpose of this Standard is to provide the safest possible vehicle for students using school buses. It needs to be stressed, however, that standards are not…

1.1 This Standard applies to single-conductor and multi-conductor Type RA90 and RC90 cables having a maximum temperature rating of 90 °C in both dry and wet locations and intended for installation in accordance with CSA C22.1, Canadian Electrical Code, Part I. 1.2 Cables covered in this Standard are intended for use on systems having nominal voltages up to 5000 V, except for 2-conductor,…

1.1 This Standard applies to household cooking ranges having a rating not exceeding 250 V and 21 kW and designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I. Note: Throughout this Standard, the word “appliance” is used to refer to the whole group of equipment covered by this Standard. Where a requirement applies only to one type of equipment, e.g., an…

1.1 This Standard applies to newly manufactured, unfinished composite wood panels prior to use in construction, finishing, or installation. The composite wood panel categories covered are a) hardwood plywood (HWPW) (including composite and veneer core); b) particleboard (PB); c) medium density fibreboard (MDF); and d) thin MDF. Note: Refer to Clause 3.1 for further clarification. 1.2 This…

1.1 Purpose The purpose of this Standard is to provide minimum requirements for the design, construction, and marking of electrical equipment or parts of such equipment for use in Class I and Class II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations. This equipment, in normal operation, is not capable of causing ignition of the surrounding atmosphere under the…

1.1 General This Standard is designed to be used with related occupational or technical standards. It is intended to be referenced by other standards as the primary set of requirements for health and safety management of work in confined spaces. This Standard is designed for voluntary application in Canadian workplaces. However, the principles established in this Standard are based on best…

This standard specifies the characteristics and test methods of polyethylene (PE) pipe and fittings designed to carry gravity flowing liquids, including surface water evacuation, soil drainage and culverts. This standard applies to single-wall pipe with annular corrugations. Pipe diameters range from 100 mm to 600 mm and can be perforated. This document was developed to serve as a reference…

ISO/IEC TR 30125:2016 provides guidance for developing a consistent and secure method of biometric (either alone or supported by non-biometric) personalization and authentication in a mobile environment for systems procured on the open market. Guidance is provided for - 1:1 verification or 1:few positive identification; - biometric sample capture in the mobile environment where…