Search

ISO 19080:2016 describes the CoAP facilities between two or more ITS stations communicating over the global internet communication network. It is assumed that the reader is familiar with IETF specifications found in request for comments (RFCs) of individual CoAP and 6LoWPAN protocol blocks used within this document. This document does not define a new protocol, a new exchange of messages at the…

ISO/IEC 30116:2016 - specifies the methodology for the measurement of specific attributes of OCR-B character strings, - defines a method for evaluating these measurements and deriving an overall assessment of character string quality, - defines a reference decode algorithm for OCR-B, and - gives information on possible causes of deviation from optimum grades to assist users in…

ISO 19364:2016 specifies a method for comparing computer simulation results from a vehicle mathematical model to measured test data for an existing vehicle according to steady-state circular driving tests as specified in ISO 4138 or the Slowly Increasing Steer Test that is an alternative to ISO 4138. The comparison is made for the purpose of validating the simulation tool for this type of test…

ISO 17488:2016 provides a detection-response task mainly intended for assessing the attentional effects of cognitive load on attention for secondary tasks involving interaction with visual-manual, voice-based or haptic interfaces. Although this document focuses on the assessment of attentional effects of cognitive load (see Annex A), other effects of secondary task load may be captured by…

ISO/IEC 30116:2016 - specifies the methodology for the measurement of specific attributes of OCR-B character strings, - defines a method for evaluating these measurements and deriving an overall assessment of character string quality, - defines a reference decode algorithm for OCR-B, and - gives information on possible causes of deviation from optimum grades to assist users in…

IEC TS 61724-2:2016(E) defines a procedure for measuring and analyzing the power production of a specific photovoltaic system with the goal of evaluating the quality of the PV system performance. The test is intended to be applied during a relatively short time period (a few relatively sunny days). The intent of this document is to specify a framework procedure for comparing the measured power…

1.1 This Code sets out the minimum provisions for the installation, extension, alteration, and renewal of hydronic heating systems. 1.2 This Code applies to open and closed hydronic heating systems. These systems include a) hydronic space heating; b) radiant heating (wall, floor, ceiling); c) convectors; d) fan coils; e) combination potable water heating and space heating (combo) systems…

1.1 General This Standard applies to the protection of workers from the hazards arising from the use of mobile or stationary machinery. It provides the criteria to be observed and the description, selection, and application of guards and protective devices. Where a current CSA Standard exists for a specific type of machinery (e.g., CSA B167, CAN/CSA-B354.2, CSA M424.1, CSA Z142, CAN/CSA-Z248,…

This International Standard aims to define the requirements and method used to determine the volatile matter content of solid biofuels. It is intended for persons and organisations that manufacture, plan, sell, erect or use machinery, equipment, tools, and entire plants related to solid biofuels, and to all persons and organisations involved in producing, purchasing, selling, and utilizing solid…

This International Standard defines a method of determining bulk density of solid biofuels by the use of a standard measuring container. This method is applicable to all pourable solid biofuels with a nominal top size of maximum 100 mm. Bulk density is not an absolute value; therefore, conditions for its determination have to be standardized in order to gain comparative measuring results. NOTE…