Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system compo...
ISO 12619-5:2016 specifies general requirements and definitions of compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components, intended for use on the types of motor vehicles defined in ISO 3833. It also provides general design principles and specifies requirements for instructions and markings.
It is applicable to vehicles using compressed gaseous hydrogen (CGH2)…
Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for mar...
IEC TS 62600-2:2016(E) provides the essential design requirements to ensure the engineering integrity of wave, tidal and other water current energy converters, referred to as marine energy converters (MECs), for a specified design life. Provides an appropriate level of protection against damage from all hazards that may lead to failure of the primary structure, defined as the collective system…
Process management for avionics - Counterfeit prevention - Part 2: Managing electronic components fr...
IEC TS 62668-2:2016(E) defines requirements for avoiding the use of counterfeit, recycled and fraudulent components when these components are not purchased from the original component manufacturer (OCM) or are purchased from outside of franchised distributor networks for use in the aerospace, defence and high performance (ADHP) industries. This practice is used, as derogation, only when there are…
Information technology — Test methods for machine readable travel documents (MRTD) and associated de...
ISO/IEC 18745-2:2016 defines the test plan, based on ISO/IEC 10373‑6, for the contactless interface of eMRTDs and eMRTD associated readers compliant with ICAO Doc 9303.
Application requirements for eMRTD and eMRTD reader are outside of the scope of ISO/IEC 18745-2:2016.
Information technology - Test methods for machine readable travel documents (MRTD) and associated de...
ISO/IEC 18745-2:2016 defines the test plan, based on ISO/IEC 10373‑6, for the contactless interface of eMRTDs and eMRTD associated readers compliant with ICAO Doc 9303.
Application requirements for eMRTD and eMRTD reader are outside of the scope of ISO/IEC 18745-2:2016.
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuse...
IEC 60269-2:2013+AMD1:2016 provides supplementary requirements for fuses for use by authorized persons and are generally designed to be used in installations where the fuse-links are accessible to, and may be replaced by, authorized persons only. Fuses for use by authorized persons according to the following fuse systems also comply with the requirements of the corresponding subclauses of IEC…
Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 2: Data link layer
ISO 14230-2:2016 specifies data link layer services tailored to meet the requirements of UART-based vehicle communication systems on K-Line as specified in ISO 14230‑1. It has been defined in accordance with the diagnostic services established in ISO 14229‑1 and ISO 15031‑5, but is not limited to use with them and is also compatible with most other communication needs for in-vehicle networks. The…
Road vehicles — Local Interconnect Network (LIN) — Part 1: General information and use case definiti...
ISO 17987-1:2016 gives an overview of the structure and the partitioning of ISO 17987 (all parts). In addition, it outlines the use case where the ISO 17987 (all parts) will be used. The terminology defined in ISO 17987-1:2016 is common for all LIN communication systems and is used throughout ISO 17987 (all parts).
It has been established in order to define the use cases for LIN.
Road vehicles — Local Interconnect Network (LIN) — Part 2: Transport protocol and network layer serv...
ISO 17987-2:2016 specifies a transport protocol and network layer services tailored to meet the requirements of LIN‑based vehicle network systems on local interconnect networks. The protocol specifies an unconfirmed communication.
The LIN protocol supports the standardized service primitive interface as specified in ISO 14229‑2.
ISO 17987-2:2016 provides the transport protocol and network layer…
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
ISO 14405-1:2016 establishes the default specification operator (see ISO 17450‑2) for linear size and defines a number of special specification operators for linear size for features of size, e.g. "cylinder", "sphere", "torus,"[1], "circle", "two parallel opposite planes", or "two parallel opposite straight lines".
It also defines the…
