This document specifies the minimum training to be given to trainee crane slingers and crane signallers to develop the basic slinging skills and to impart the requisite knowledge for competency required for slingers and signallers as defined in ISO 15513.
Footwear — Test methods for whole shoe — Upper sole adhesion
This document describes a test method for determining the resistance to separation of the upper from the outsole, for separating adjacent layers of the outsole or for causing tear failure of the upper or the sole. It also defines conditions of ageing that can be used for production control.
This document is applicable to all types of footwear (cementing, vulcanisation, injection moulding, etc.)…
Safety requirements for power electronic converter systems and equipment - Part 2: Power electronic ...
IEC 62477-2:2018 applies to power electronic converter systems (PECS) and equipment, their components for electronic power conversion and electronic power switching, including the means for their control, protection, monitoring and measurement, such as with the main purpose of converting electric power, with rated system voltages from 1 000 V AC or 1 500 V DC up to 36 kV AC or 54 kV DC.
This…
Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 6-2...
IEC 61755-6-2: 2018 defines the dimensional limits of an optical interface for reference connectors necessary to meet specific requirements for fibre-to-fibre interconnection of non-angled polished multimode reference connectors with cylindrical ferrules intended to be used for attenuation measurements in the field or factory. One grade of reference connector is defined in this document. The…
Cards and security devices for personal identification — Contactless proximity objects — Part 4: Tra...
This document specifies a half-duplex block transmission protocol featuring the special needs of a contactless environment and defines the activation and deactivation sequence of the protocol.
This document is intended to be used in conjunction with other parts of ISO/IEC 14443 and is applicable to proximity cards or objects of Type A and Type B.
Cards and security devices for personal identification - Contactless proximity objects - Part 4: Tra...
This document specifies a half-duplex block transmission protocol featuring the special needs of a contactless environment and defines the activation and deactivation sequence of the protocol.
This document is intended to be used in conjunction with other parts of ISO/IEC 14443 and is applicable to proximity cards or objects of Type A and Type B.
Cards and security devices for personal identification — Contactless proximity objects — Part 3: Ini...
This document describes the following:
- polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD);
- the byte format, the frames and timing used during the initial phase of communication between PCDs and PICCs;
- the initial Request and Answer to Request command content;
- methods to detect and communicate with one PICC among…
Cards and security devices for personal identification - Contactless proximity objects - Part 3: Ini...
This document describes the following:
- polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD);
- the byte format, the frames and timing used during the initial phase of communication between PCDs and PICCs;
- the initial Request and Answer to Request command content;
- methods to detect and communicate with one PICC among…
Mechanical vibration — Measurement and evaluation of machine vibration — Part 4: Gas turbines in exc...
This document is applicable to land-based gas turbines with fluid-film bearings and power outputs greater than 3 MW and an operating speed under load between 3 000 r/min and 30 000 r/min. In some cases (see the list of exclusions below), this includes other rotating machinery coupled either directly or through a gearbox. The evaluation criteria provided in this document are applicable to the…
Tractors and machinery for agriculture and forestry — Camera interface between tractor and implement...
This document defines the physical link between analogue cameras mounted on implements and operator terminals or monitors installed in tractor cabins. The interface supports up to two analogue video streams and provides electrical power to the cameras. It is designed to be installed inside the cab of agricultural equipment.
