Energy management and energy savings — Building energy data management for energy performance — Guid...
This document gives guidelines for how the energy management team (EnMT) in an organization can define, request and regularly access the data and information needed to implement an energy management system (EnMS) designed to continually improve energy performance in buildings.
It is applicable to data provided by human processes or by building automation, control, information technology, or even…
This document defines terms and definitions commonly used for the annotation of video from NDSs collected during real-world driving in an uncontrolled setting.
Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power (energ...
This document specifies methods by which the measurement of power (energy) density distribution is made and defines parameters for the characterization of the spatial properties of laser power (energy)density distribution functions at a given plane.
The methods given in this document are intended to be used for the testing and characterization of both continuous wave (cw) and pulsed laser beams…
Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols
This document defines basic terms, symbols, and units of measurement for the field of laser technology in order to unify the terminology and to arrive at clear definitions and reproducible tests of beam parameters and laser-oriented product properties.
NOTE The laser hierarchical vocabulary laid down in this document differs from that given in IEC 60825?1. ISO and IEC have discussed this…
1 Scope
1.1
This Standard addresses the following aspects of cementitious materials:
a)
their definitions;
b)
their chemical, physical, and uniformity requirements;
c)
the tests required;
d)
the procedures for inspection and sampling; and
e)
the units of measurement, packaging, marking, and storage.
1.2
The cementitious materials for use in concrete are classified as follows in this…
1 Scope
1.1
This Code applies to the portions of a motor vehicle maintenance facility where natural-gas-fuelled vehicles are maintained, repaired, or stored during maintenance or repair, including areas and systems ancillary thereto.
1.2
The scope of this Code does not include
a)
indoor or outdoor refuelling operations;
b)
parking facilities; or
c)
other fuels used for vehicles.
1.3…
1 Scope
1.1 Purpose
This Standard specifies technical requirements on how to make buildings and the exterior built environment accessible and safely usable by persons with physical, sensory, or cognitive disabilities.
1.2 Application
This Standard describes technical requirements that can be used in the design and construction of new facilities or exterior environments, or in modifications to…
1 Scope
1.1
This Standard specifies the requirements for cord sets and power-supply cords employing molded-on or assembled-on fittings, rated 600 V maximum, and intended for use in non-hazardous locations in accordance with CSA C22.1, Canadian Electrical Code, Part I, and CAN/CSA-C22.2 No. 0, General Requirements—Canadian Electrical Code, Part II.
1.2
This Standard also specifies the…
1 Scope
1.1
This Standard applies to single- and multiple-conductor fire alarm and signal cables with a maximum nominal voltage rating of 300 V and a minimum temperature rating of 60 °C for use in buildings and other structures in dry, damp, or wet locations in accordance with the Canadian Electrical Code, Part I.
1.2
Because other CSA Group Standards specify requirements for certain…
1 Scope
1.1
This Standard applies to high density polyethylene (HDPE) conduit, HDPE conduit with conductors, and polyethylene dual-wall (PEDW) corrugated conduit, intended for use at a continuous operating temperature of 75 °C or 90 °C, for installation in accordance with the Rules of the Canadian Electrical Code, Part I, for direct burial or encasement in concrete or masonry in ordinary (non-…
