Search

1 Scope 1.1 This Code applies to the installation of a) appliances, equipment, components, and accessories where gas is to be used for fuel purposes; b) piping and tubing systems extending from the termination of the utility installation or from the distributor’s propane tank; c) vehicle-refuelling appliances and associated equipment meeting the requirements of a generalpurpose appliance…

1 Scope 1.1 This Code applies to a) the storage, handling, and transfer of propane; b) propane used as an engine fuel in other than motor vehicles; and c) the installation, operation, and maintenance of containers and equipment to be used for propane at customer locations, in distribution locations and filling plants. 1.2 This Code does not apply to a) transportation of propane; b)…

1 Scope 1.1 This Code contains the requirements for fuel-related components and accessories and their assembly on an appliance utilizing gas, downstream of the manual shut-off valve specified in Clause 6.18.2 of CSA B149.1. Clause 16 of this Code contains additional requirements for process ovens, including bakery ovens, process furnaces, and atmosphere generators operating at approximately…

1 Scope 1.1 This Code applies to a) the installation, servicing, and repair of propane fuel system components and containers on motor vehicles for the provision of motive power; and b) the installation of containers on motor vehicles such as recreational vehicles, outdoor food service units, and wash-mobiles when propane is to be used for fuel purposes (other than motive power). Note: “…

1 Scope 1.1 This Standard applies to decorative lighting strings, decorative lighting outfits, pre-lit trees, and accessories, intended for seasonal or commercial use connected to circuits of 120 V nominal or less by means of an attachment plug, and designed to be used in accordance with the rules of the Canadian Electrical Code, Part I, in non-hazardous locations. 1.2 These requirements…

1 Scope 1.1 This Standard applies to a) electrostatic air cleaners intended to remove dust and dirt from the air and intended for general indoor residential and commercial use; b) air ionizer type air cleaners; c) other similar ionizing equipment; and d) duct-mounted type electrostatic air cleaners, air ionizers, and other similar ionizing equipment intended for general indoor…

1 Scope 1.1 This Standard specifies the technical requirements for the interconnection of distributed energy resources (DER) and distribution systems up to 50 kV line to line at the point of common coupling (PCC). 1.2 This Standard does not define the maximum DER capacity or the upper voltage limit for installations that are interconnected with a single PCC or connected to a given feeder.…

1 Scope 1.1 Purpose The purpose of this Standard is to establish criteria for the design, manufacture, testing, inspection, installation, maintenance, use, and operation of vehicle-mounted aerial devices installed on a chassis, primarily used to position personnel, and for the training of operators for that equipment, to achieve the following objectives: a) prevention of personal injuries and…

1 Scope This document contains requirements for defining the seismic design procedures and criteria for offshore structures; guidance on the requirements is included in Annex A. The requirements focus on fixed steel offshore structures and fixed concrete offshore structures. The effects of seismic events on floating structures and partially buoyant structures are briefly discussed. The site-…

1 Scope This document provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions: — production; — storage and/or offloading; — drilling and production; — production, storage and offloading; — drilling, production, storage and offloading. NOTE 1 Floating…