Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance and constancy t...
IEC 61223-3-5:2019 applies to CT SCANNERS that conform to IEC 60601-2-44:2009, IEC 60601-2-44:2009/AMD1:2012 and IEC 60601-2-44:2009/AMD1:2012AMD2:2016.
IEC 60601-2-44 and this document
• defines the essential parameters which describe the performance of CT SCANNERS with regard to image quality, RADIATION OUTPUT and PATIENT positioning; the list of parameters to be tested can be found in…
Electroacoustics - Hearing aids - Part 9: Methods of measurement of the performance characteristics ...
IEC 60118-9:2019 specifies methods for the measurement of bone conduction hearing aid characteristics.
The methods described will produce a suitable basis for the exchange of information or for direct comparison of the electroacoustical characteristics of bone conduction hearing aids. These methods are chosen to be practical and reproducible and are based on selected fixed parameters.
The…
Device embedding assembly technology - Part 2-5: Guidelines - Implementation of a 3D data format for...
IEC 62878-2-5:2019 specifies requirements based on XML schema that represents a design data format for device embedded substrate, which is a board comprising embedded active and passive devices whose electrical connections are made by means of a via, electroplating, conductive paste or printing of conductive material.<br />
This data format is to be used for simulation (e.g. stress, thermal…
Device embedding assembly technology - Part 2-5: Guidelines - Implementation of a 3D data format for...
IEC 62878-2-5:2019 specifies requirements based on XML schema that represents a design data format for device embedded substrate, which is a board comprising embedded active and passive devices whose electrical connections are made by means of a via, electroplating, conductive paste or printing of conductive material.
This data format is to be used for simulation (e.g. stress, thermal, EMC),…
Electrical installations in ships - Part 302-2: Low voltage switchgear and controlgear assemblies - ...
IEC 60092-302-2:2019 defines the specific requirements of low voltage marine power switchgear and controlgear assemblies (MPSC-assemblies) as follows:
- stationary assemblies with enclosure for which the rated voltage does not exceed 1 000 V AC or 1500 V DC;
- assemblies intended for use in conjunction with the power generation, distribution and conversion of electric energy, and for the…
Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, ...
IEC 62668-1:2019 defines requirements for avoiding the use of counterfeit, recycled and fraudulent components used in the aerospace, defence and high performance (ADHP) industries. It also defines requirements for ADHP industries to maintain their intellectual property (IP) for all of their products and services. The risks associated with purchasing components outside of franchised distributor…
Railway applications - Rolling stock - Electrical equipment in trolley buses - Safety requirements a...
IEC 63076:2019 applies to electrical systems aboard vehicles of the trolley bus type, as defined in 3.1, fed with a nominal line voltage (Un) between 600 V DC and 750 V DC. This document defines the requirements and constructional advice, especially to avoid electrical danger to the public and to staff. Where special requirements exist for trolley buses, advice is given for mechanical and…
Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular ...
IEC 61076-3-123:2019. covers hybrid rectangular connectors with a 3 poles 16 A electric portion for power supply and a duplex fibre optic connector type LC portion for data transmission.
These connectors consist of fixed and free connectors, either rewirable or non-rewirable (for both portions) and use the rectangular push-pull housing described in IEC 61076-3-117 with IP65/IP67 degree of…
Methods for calculating size specific dose estimates (SSDE) for computed tomography
IEC 62985:2019 applies to<br />
– CT SCANNERS that are able to display and report CTDIVOL in accordance with<br />
IEC 60601-2-44, and<br />
– RADIATION dose index monitoring software (RDIMS)<br />
for the purpose of calculating, displaying and recording the SIZE SPECIFIC DOSE ESTIMATE (SSDE) and its associated components.<br />
Specifically, this document provides…
Measurement procedures of magnetic field levels generated by electronic and electrical equipment in ...
IEC TS 62764-1:2019(E) applies to the assessment of human exposure to low frequency magnetic fields generated by automotive vehicles. For plug-in vehicles, this includes the electric vehicle supply equipment (EVSE) and associated cables provided by the car manufacturer.
The scope of this document establishes the measurement procedure for the evaluation of magnetic field levels in the automotive…
