Search

This document describes the test methods used for conformity testing, that is methods for determining whether a driving licence can be considered to comply with the requirements of the ISO/IEC 18013 series for: — machine readable technologies (ISO/IEC 18013-2), and — access control, authentication and integrity validation (ISO/IEC 18013-3). The test methods described in this document are…

ISO 21919 describes interfaces for automated machine tending of at least one computer numerically controlled (CNC) machine by using a machine tending device. These interfaces are the link between automated machine tending devices and machines used for production. The automated machine tending is initiated by either the machine tending system or by the machine. This document gives an overview and…

This document describes the test methods used for conformity testing, that is methods for determining whether a driving licence can be considered to comply with the requirements of the ISO/IEC 18013 series for: — machine readable technologies (ISO/IEC 18013-2), and — access control, authentication and integrity validation (ISO/IEC 18013-3). The test methods described in this document are…

IEC 61784-3-12:2010+A1:2019 specifies a safety communication layer (services and protocol) based on CPF 12 of IEC 61784-2 and IEC 61158 Type 12. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer. <strong>This consolidated version consists of the first edition (2010) and its amendment 1 (2019).…

IEC 61784-3-12:2010+A1:2019 specifies a safety communication layer (services and protocol) based on CPF 12 of IEC 61784-2 and IEC 61158 Type 12. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer. This consolidated version consists of the first edition (2010) and its amendment 1 (2019). Therefore, no need…

This document specifies a systematic system for representing humanoids in a network-enabled 3D graphics and multimedia environment. Conceptually, each humanoid is an articulated character that can be embedded in different representation systems and animated using the facilities provided by the representation system. This document specifies the abstract form and structure of humanoids. Further,…

This document specifies a systematic system for representing humanoids in a network-enabled 3D graphics and multimedia environment. Conceptually, each humanoid is an articulated character that can be embedded in different representation systems and animated using the facilities provided by the representation system. This document specifies the abstract form and structure of humanoids. Further,…

This document provides design requirements and guidance for the manufacturers of electrical and electronic equipment for use in all kinds of mobile (including hand-held) agricultural machinery, forestry machinery, landscaping and gardening machinery [referred to hereafter as machine(s)]. The term machinery covers tractors and implements. This document gives tests for specific environmental…

1 Scope This part of IEC 61000 for EMC immunity requirements applies to electrical and electronic equipment intended for use in residential, commercial, public and light-industrial locations. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies where no requirements are specified. This generic EMC immunity standard is…

1 Scope 1.1 This Standard gives minimum requirements for ventilators used in buildings which are designed to permit venting of unoccupied spaces to the exterior so as to minimize the unwanted accumulation of condensation, moisture, and excess heat in the building component or assembly. These include a) passive airflow ventilators for buildings; and b) mechanical (powered) airflow…