Cork bark selected as bottling product — Part 1: Sensory evaluation — Methodology for sensory evalua...
This document defines a test method for the detection, qualification and possible assessment of odours/flavours exogenous to cork bark selected as bottling product in contact with beverages, still, sparkling and sparkling wines, alcohols and spirits, beers and ciders.
This document is applicable to:
— cork bark selected as bottling product in all its forms;
— all cork components of cork…
High-voltage switchgear and controlgear - Part 312: Guidance for the transferability of type tests o...
IEC TR 62271-312:2021(E) refers to high-voltage / low-voltage prefabricated substations (hereinafter prefabricated substations) as specified in IEC 62271-202:2014.
This document, among other options as agreed between manufacturer and user, can be used for the transferability of type tests performed on one or more prefabricated substations with a defined set of ratings and arrangement of…
Electronic displays - Part 2-1: Measurements of optical characteristics - Fundamental measurements
IEC 62977-2-1:2021(E) specifies standard measurement conditions and measuring methods for determining the optical characteristics of electronic display modules and systems. These methods apply to emissive and transmissive direct view displays that render real 2D images on a flat panel. This document evaluates the optical characteristics of these displays under darkroom conditions. This document…
Performance requirements for climate resilience of low slope membrane roofing systems
1 Scope
1.1
This Standard outlines requirements for low slope membrane roofing systems (LSMRS) when identified as “silver” and “gold” performance level based on the climate severity and resilience requirements.
Note: The National Building Code of Canada and the National Energy Code of Canada for Buildings provides “bronze” requirements for LSMRS.
1.2
This Standard is intended to be used by…
Compressed natural gas refuelling stations installation code
1 Scope
1.1 Inclusions
This Code applies to all compressed natural gas (CNG) refuelling stations, including those that are fixed or mobile and intended for private or public dispensing operations.
1.2 Exclusions
This Code does not apply to
a)
refuelling vehicles with liquefied natural gas (LNG). Refuelling vehicles with LNG is addressed in CSA B108.2. However, when an LNG facility has…
Liquefied natural gas refuelling stations installation code
1 Scope
1.1 Inclusions
This Code applies to
a)
the design, location, construction, operation, operator training, and maintenance of LNG refuelling stations, including LNG mobile refuelling units (MRUL), with single containment storage tanks up to 265 m3 (70 000 gal) water capacity employed for vehicle LNG dispensing operations;
b)
shop-fabricated and assembled refuelling stations when used…
1 Scope
1.1 General
This Code sets out the minimum provisions for the installation, extension, alteration, and renewal of hydronic heating systems.
1.2 Inclusions
This Code applies to open and closed hydronic heating systems. These systems include
a)
hydronic space heating;
b)
radiant heating (wall, floor, and ceiling);
c)
convectors;
d)
fan coils;
e)
combination potable-water-…
1 Scope
1.1 Inclusions
This Code applies to the portions of a motor vehicle maintenance facility where propane-fuelled vehicles are maintained, repaired, or stored during maintenance or repair, including ancillary areas and systems. This applies to where the fuel system is for motive power of the vehicle.
1.2 Exclusions
This Code does not apply to
a)
motor vehicle repair procedures;
b)…
1 Scope
1.1
This Standard applies to multiple-conductor control and instrumentation cables (including thermocouple cables and thermocouple extension cables) having a voltage rating not exceeding 1000 V and intended for installation in accordance with CSA C22.1, Canadian Electrical Code, Part I.
Note: The designations for such cables are “CIC” for unarmoured cables and “ACIC” for armoured…
Standard for fittings for use in compressed gaseous hydrogen fuelling stations
1 Scope
1.1 General
1.1.1 Scope of this Standard
This Standard specifies methods for testing and evaluating fittings for use with compressed hydrogen gas and hydrogen-rich gas mixtures.
1.1.2 Applicability of this Standard
This Standard was developed primarily for hydrogen fuelling station applications. However, this does not preclude other industries from adopting this Standard for their…