Search

Field devices are a key component in intelligent transport systems (ITS). Field devices include traffic signals, message signs, weather stations, traffic sensors, roadside equipment for connected ITS (C-ITS) environments, etc. The ISO 20684 series defines data that can be used when field devices need to exchange information with other external entities (called “managers” in this document, even if…

This document specifies requirements for two types of reinforced hoses and hose assemblies of nominal size from 3,2 to 25, dependent on relation of minimum burst pressure to maximum working pressure. Each type is divided into classes dependent on maximum working pressure. They are suitable for use with: —    oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures…

IEC 61243-1:2021 is applicable to portable voltage detectors, with or without built-in power sources, to be used on electrical systems for voltages of 1 kV to 800 kV AC, and frequencies of 50 Hz and/or 60 Hz. This document applies only to voltage detectors of capacitive type used in contact with the bare part to be tested, as a complete device including its insulating element or as a separate…

IEC 61076-3-122:2021 covers 8-way, shielded, free and fixed rectangular connectors for I/O and data transmission with frequencies up to 500 MHz. It is intended to specify the common dimensions, mechanical, electrical and environmental characteristics and tests for this family of connectors. Connectors complying with this document provide an ingress protection level of IP20; however, they are…

This document is applicable to road vehicles, where the electronic vehicle interface is used to perform a test method that is part of a periodic technical inspection (ePTI). This document describes use cases and specifies technical requirements in order to support the ePTI-relevant vehicle safety system(s) checks during the periodic technical inspection via the electronic interface. This document…

This document is a specialization of the more general reference model for software and systems product line engineering and management described in ISO/IEC 26550. The specialization defined herein addresses a class of methods and tools referred to as feature-based software and systems product line engineering, or feature-based PLE, which has emerged as a proven and repeatable product line…

This document is a specialization of the more general reference model for software and systems product line engineering and management described in ISO/IEC 26550. The specialization defined herein addresses a class of methods and tools referred to as feature-based software and systems product line engineering, or feature-based PLE, which has emerged as a proven and repeatable product line…

This document defines a process assessment model for software life cycle processes, conformant with the requirements of ISO/IEC 33004, for use in performing a conformant assessment in accordance with the requirements of ISO/IEC 33002.

This document defines a process assessment model for software life cycle processes, conformant with the requirements of ISO/IEC 33004, for use in performing a conformant assessment in accordance with the requirements of ISO/IEC 33002.

This document describes criteria and procedures for acoustic classification of dwellings. The purpose of this document is to make it easier for developers to specify a classified level of acoustic quality for a dwelling, and help users and builders to be informed about the acoustic conditions and define increased acoustic quality. The document can also be applied as a general tool to characterize…