1 Scope
1.1
This Standard applies to automatically operating gas-fired central furnaces (see Clause 3), hereinafter
referred to as furnaces, for installation in residential, commercial, and industrial structures including
furnaces for direct vent, recreational vehicle, outdoor, and manufactured (mobile) homes. These
furnaces can include a cooling unit. All units are to be constructed…
Standard for manually operated metallic gas valves for use on piping systems up to 5 psig
1 Scope
1.1
This Standard applies to newly produced manually operated metallic gas shut-off valves, hereinafter referred to as valves, constructed entirely of new, unused parts and materials that
a)
are for indoor/outdoor installation;
b)
are for use in the gas piping between the outlet of the gas distributor's meter and the inlet connection of the pressure regulator installed upstream…
Sterilization of health care products — Microbiological methods — Part 2: Tests of sterility perform...
1 Scope
1.1 This document specifies the general criteria for tests of sterility on medical devices that have been exposed to a treatment with the sterilizing agent which has been reduced relative to that anticipated to be used in routine sterilization processing. These tests are intended to be performed when defining, validating or maintaining a sterilization process.
1.2 This document is not…
Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional ...
IEC 61784-3-18:2011+A1:2016+A2:2021 specifies a safety communication layer (services and protocol) based on CPF 18 of IEC 61784-2 and IEC 61158 Type 22. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer.
Plain bearings — Bearing fatigue — Part 1: Plain bearings in test rigs and in applications under con...
This document specifies a method of improving test result comparability by evaluating the stresses in the bearing layers leading to fatigue (see Annex A). A similar evaluation is required in practical applications. Because the stresses are the result of pressure build-up in the hydrodynamic film, it is essential to fully state the conditions of operation and lubrication. In addition to dynamic…
Application integration at electric utilities - System interfaces for distribution management - Part...
IEC 61968-3:2021 provides utilities with the means to supervise main substation topology (breaker and switch state), feeder topology and control equipment status through SCADA, AMI and other data sources. It also provides the means for handling network connectivity and loading conditions. Finally, it makes it possible for utilities to locate customer telephone complaints and coordinate activities…
Photovoltaic modules - Extended-stress testing - Part 1: Modules
IEC TS 63209-1:2021 is intended to provide information to supplement the baseline testing defined in IEC 61215, which is a qualification test with pass-fail criteria. This document provides a standardized method for evaluating longer term reliability of photovoltaic (PV) modules and for different bills of materials (BOMs) that may be used when manufacturing those modules. The included test…
Integrated circuits - EMC evaluation of transceivers - Part 5: Ethernet transceivers
IEC 62228-5:2021(E) specifies test and measurement methods for EMC evaluation of Ethernet transceiver ICs under network condition. It defines test configurations, test conditions, test signals, failure criteria, test procedures, test setups and test boards. It is applicable for transceiver of the Ethernet systems
100BASE-T1 according to ISO/IEC/IEEE 8802-3/AMD1;
100BASE-TX according to ISO/IEC…
Communication networks and systems for power utility automation - Part 7-5: IEC 61850 modelling conc...
IEC TR 61850-7-5:2021, which is a technical report, establishes modelling concepts that help the user to understand how to apply the models defined in IEC 61850-7-4 and IEC 61850-7-3 to implement practical applications.
This document provides the basic concepts that are valid for all application domains using IEC 61850. Domain specific concepts are defined in other technical reports as in the…
Integrated circuits - EMC evaluation of transceivers - Part 5: Ethernet transceivers
IEC 62228-5:2021 specifies test and measurement methods for EMC evaluation of Ethernet transceiver ICs under network condition. It defines test configurations, test conditions, test signals, failure criteria, test procedures, test setups and test boards. It is applicable for transceiver of the Ethernet systems
100BASE-T1 according to ISO/IEC/IEEE 8802-3/AMD1;
100BASE-TX according to ISO/IEC/…