Numerical control of machines — Axis and motion nomenclature
This edition cancels and replaces the ISO Recommendation R 841-1968. Defines axis and motion nomenclature, and is intended to simplify programming and to facilitate the interchangeability of recorded data. Applies to all numerically controlled machines.
Commercial refrigerated cabinets — Methods of test — Part 1: Calculation of linear dimensions, areas...
Defines the terms and establishes the methods for determining linear dimensions, areas and volumes for commercial refrigerated cabinets intended for the sale and/or display of food products. - Replaces ISO recommendation R 1992-1971.
1. SCOPE
1.1 This Standard applies to complete, flue-connected, oil-fired warm air
appliances, irrespective of the heating capacity or the type of burner used.
1.2 The requirements given herein apply to appliances intended for
installation with the appliance base placed upon the floor, except as provided
for in Clause 1.4; and intended to be used with pipes or ducts for the…
Milling cutters mounted on centring arbors having a 7/24 taper — Fitting dimensions — Centring arbor...
Applies both to cutters with inserted teeth, made from high speed steel or with brazed carbide tips, and to cutters equipped with indexable carbide tips. Concerns milling cutters, arbor located, to be used with a well-defined spindle nose having a 7/24 taper and milling cutter, arbor located, to be used bith spindle nose No. 50 and spindle nose No. 60 having a 7/24 taper. The general fitting…
Milling cutters mounted on centring arbors having a 7/24 taper — Inserted tooth cutters
These cutters are equipped either with high speed steel inserted teeth or with inserted teeth with brazed carbide tips. Concerns milling cutters, arbor located, to be used with a well-defined spindle nose having a 7/24 taper and milling cutter, arbor located, to be used with both spindle nose No. 50 and spindle nose No. 60 having a 7/24 taper. Dimensions for centring arbors and fitting dimensions…
Interchangeable magnetic six-disk pack — Physical and magnetic characteristics
Defines the physical and magnetic characteristics for interchange of magnetic six-disk packs in order to facilitate the interchange of data between electronic data processing systems. Does not apply to a specific design. It defines only the parameters relevant for interchange.
Interchangeable magnetic six-disk pack - Physical and magnetic characteristics
Defines the physical and magnetic characteristics for interchange of magnetic six-disk packs in order to facilitate the interchange of data between electronic data processing systems. Does not apply to a specific design. It defines only the parameters relevant for interchange.
Dimensions of clevis and tongue couplings of string insulator units
Applies to string insulator units of the can and pin type and also of the long rod type as well as to the fittings used with such insulators. Defines dimensions of a series of clevis and tongue couplings to permit the assembly of insulators or fittings supplied by different manufacturers.
Note: - For co-ordination between standardized dimensions and strength classes of cap and pin type…
Applies to supply apparatus with stabilization, which is designed to supply calibrated values of voltage and/or current in connection with electrical measurement and to accessories used with this apparatus. Specifies the essential electrical characteristics. Defines the special terms related to this apparatus. Specifies methods for testing these types of apparatus in order to verify compliance…
Methods for for measuring the performance of electric clothes washing machines for household use
States and defines test methods of interest to the users for measuring the principal performance characteristics of household electric washing machines.
This standard is concerned neither with safety nor with performance requirements.
This standard is applicable to horizontal drum type electric clothes washing machines, to spin extractors and to washing and spinning machines for household use.
It…
