Load Test Procedure for Wood Roof Trusses for Houses and Small Buildings
1. Scope
1.1 General
This Standard covers the load test procedure for evaluating the
strength and deformation performance of wood roof trusses intended for
use in housing and small buildings as defined in Part 9 of the National
Building Code of Canada.
Note: Part 9 of the National Building Code of Canada provides detailed
requirements…
Ductile iron pipes — Centrifugal cement mortar lining — Composition controls of freshly applied mort...
Specifies a certain number of methods used for controls of mortar linings complying with requirements of ISO 4179 and applied csntrifugally on the inner surface of pipes intended for transporting water under pressure as defined in ISO 2531. Describes the drying method and the xylol method.
Specifies a method for the measurement of the temperature of the crystallizing point to the nearest 0.01 °C. Relates to a test portion saturated with water. Application of a correction to determine this point for the anhydrous material. Defines the requirements which must be fulfilled by the thermometer and describes the procedure for checking the thermometer. The arrangement of a crystallizing…
Binders for paints and varnishes — Determination of softening point — Ring-and-ball method
Specifies a method of test for resins (including rosin) and similar materials by means of the ring-and-ball apparatus. In general, with materials of this type, softening does not take place at a definite temperature. As the temperature rises, these materials gradually and imperceptibly change from brittle or exceedingly thick and slow-flowing materials to softer and less viscous liquids. For this…
Gives specifications relating to asbestos-cement pipes and joints intended for use under pressure. Defines certain conditions of manufacture, classification, characteristics, including nominal diamenters, thickness of walls, tolerances etc., and acceptance tests applicable to these products, as well as to special applications.
Asbestos-cement pipes, joints and fittings for sewerage and drainage
Gives specifications relating to asbestos-cement pipes, joints and fittings suitable for use with gravity flow at atmospheric pressure, intended for sewerage and drainage applications. Defines certain conditions of manufacture, classification, characteristics and acceptance tests applicable to these products.
Methods for measuring the performance of electric household coffee makers
States and defines the principal performance characteristics for electric coffee makers, which are of interest to the user and describes the standard methods for measuring these characteristics.
Definitions of CAMAC terms used in IEC publications
Defines the terms specific to the CAMAC modular instrumentation and digital interface system which forms the subject of several IEC standards. It includes also other terms whose use is well established and those of corresponding characteristics of the NIM system of instrumentation.
An interface system for programmable measuring instruments (byte serial, bit parallel) - Part 2: Cod...
Applies principally to small to medium-scale instrument systems comprising mainly measurement, stimulus and interconnect devices with a controller. Specifies a set of codes and formats, defines communication protocols and defines common commands and characteristics for instrument system applications.
Printed boards - Part 5: Specification for single and double sided printed boards with plated-throug...
Defines the characteristics to be assessed, the test methods to be used and establishes uniform requirements for judging properties and dimensions of single and double sided printed boards with plated-through holes. This standard is intended as a basis on which agreements between purchaser and vendor can be made.
