Rubber building gaskets — Materials in preformed solid vulcanizates used for sealing glazing and pan...
Describes four types of material, where both resistance to creep under load and weather resistance are essential. Defines requirements for gaskets used in buildings (such as U-channel gaskets). Does not cover structural gaskets of the locking compression type. A table summarizes the general requirements.
Application of the Canada Standard System for the Sizing of Girls' and Boys'
Apparel
1. SCOPE
1.1 This standard presents a modification of the complete Canada Standard
sizing system described in CAN2-49.5-M. More specifically the control
dimensions given in CAN2-49.5-M are called size indicator dimensions and for
all children's and girl's sizes, crotch height has been replaced by waist
height as the vertical size indicator dimension to conform more closely to
present…
Road vehicles — Three-dimensional reference system and fiducial marks — Definitions
Defines a reference system and fiducial marks which are used to define dimensional data relating to road vehicles defined in ISO 3833, excepting motorcycles and mopeds. A figure illustrates the three-dimensional reference system showing the supporting surface, a schematic passenger car, the zero Z plane (horizontal zero plane), the zero Y plane (vertical longitudinal zero plane), and the zero X…
Grey iron pipes, special castings and grey iron parts for pressure main lines
Specifies the properties of the pipes, special castings and parts manufactured by any one of the following processes: centrifugal casting in metal or sand moulds; vertical casting in sand moulds. Applies to products with sockets, spigots or flanges defined by this standard. It does not apply to the down pipes and their specials used in the building industry.
Applies to the determination of the physical and mechanical properties of sintered hardmetals. Defines the terms "lot" and "test sample" and specifies test report.
Performance Requirements for Electric Heating Line-Voltage Wall Thermostats
1. Scope
1.1 This Standard applies to line-voltage wall thermostats, as defined in Clause 2.1, rated 300 V and less, complying with the requirements of CSA Standard C22.2 No. 24, Temperature- Indicating and -Regulating Equipment, and intended to be used for direct switching of a controlled resistive heating load.
1.2 This Standard covers definitions, performance requirements, marking…
Road vehicles — Dimensions of motor vehicles and towed vehicles — Terms and definitions
This edition cancels and replaces the ISO Recommendation R 612-1967. Defines terms relating to dimensions of motor vehicles and towed vehicles but does not deal with methods of measurement, the units used in reporting the results, or the accuracy required, or the order of magnitude of the dimensions defined.
Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of o...
Completes IEC 60191-3 by defining in a more satisfactory manner the mounted length and width of DIL and QUIL packages and giving recommendations for the bending of terminals of QUIL packages used for the mounting of integrated circuits. It also lists the dimensions permitting the definition of the families of packages of Form 3 and Form 4.
Methods for measuring the performance of electrically operated food preparation machines
Applies to electrically operated food preparation appliances for household use. States and defines test methods for measuring the functions that can be done by means of household electrical food preparation appliances which are of interest to the user and gives some guidelines for the evaluation of test results.
Primarily intended for the manufacturer. Not applicable to generators with pulsed sinusoidal outputs, television pattern generators, complex function generators, and generators for insulation resistance testing. Lays down a standard list of performance characteristics to be used for describing the performance of pulse generators. Defines which characteristics should be specified and standard test…
