Defines specific terms for the concerning analytical methods, with a view to facilitating understanding between anlysts. Takes maximum account of the existing terminology, in both French and English, in order to achieve the greatest possible harmonization. In particular, it takes account of IUPAC (International Union of Pure and Applied Chemistry) nomenclature.
Defines Canadian content and then gives explanations and examples
of the terms in the definition. 'Canadian content', frequently an
important aspect of the procurement process, is here defined so
that it can be considered from a common understanding.
Higher alcohols for industrial use — Methods of test — Part 7: Determination of distillation yield
Relates to C6 to C13 alcohols. The principle consists in distillation of a test portion, under carefull defined conditions. For measurement of distillation intervals not greater than 5 °C, the thermometer hsall be graduated at intervals of 0,2 °C; for intervals greater than 5 °C, the thermometer shall be graduated at intervals of 0,5 °C. Adjusting the rate of heating so that the first drop of…
Steels — Classification — Part 1: Classification of steels into unalloyed and alloy steels based on ...
This part of ISO 4948 defines steel and gives 2.0 % carbon as the usual dividing line between steel and cast iron. The classification based on the specified values for the ladle analyses of the elements given in the table.
1. Scope
1.1 This Standard sets forth the requirements for the construction, test, and
operation of permanently or cord-connected 120 V ac detertors and 12 V dc
deterctors, intended for use in the home and in recreational vehicles, for the
detection of fuel gases (natural gas, methane, and propane), in accordance with
the Canadian Electrical Code, Part I. No other function is implied or…
Supplement No.2-1982 to CSA Standard CAN3-Z349.1-79 - Dental Terminology and
Definitions
Defines, in both English and French, terminology pertaining to
dental science, dental materials, dental equipment and the
practice of dentistry. Establishes translations of terms between
the two official languages. It is anticipated that additions to
the contents of the standard will be made annually.
Steel — Determination and verification of the effective depth of carburized and hardened cases
Defines the effective case depth, and specifies methods for the determination of this depth, in steel. Is applicable to carburized cases and carbo-nitrided cases, the depth of which is greater than 0,3 mm, and parts which have a hardness of less than 450 HV at a distance of 3 X the effective case depth from the surface.
Terms and symbols for flight dynamics — Part 6: Aircraft geometry
Defines certain notions used for the geometric description of an aircraft for the purpose of flight dynamic studies. Does not give all the definitions that permit the detailed description of the shape of the aircraft. The aircraft is considered to be made up of various components. Defines general characteristics, overall dimensions of the aircraft, ground limit angles, fuselage, aerodynamic…
Building construction — Modular coordination — Modular floor plane for vertical dimensions
Defines three positions of the modular floor plane as reference plane for vertical modular dimensions in building design and gives rules for the position of the floor in relation to this plane. Applies to the construction of buildings of all types designed in accordance with the principles and rules of modular coordination as laid down in ISO 2848.
Measuring methods for cylinder cores, tube cores and screw cores of magnetic oxides
Describes methods of measuring the magnetic properties of cores of magnetic oxides. These properties are in terms of inductance L and quality factor Q of a specified coil, cores being defined by geometrical configuration and relative position. Applies to cores up to 45 mm in length and up to 8.5 mm in diameter at frequencies up to 100 MHz.
